Fourteen inches: two ordinary steps
Fourteen inches is two 7 inch steps (the ramp for 2 steps page charts other riser heights). The ramp is 14 ft in one run and 19 ft from the door with the top landing. Add the 5 ft of clear ground at the bottom and the route is 24 ft long.
Handrails are needed on both sides at this height. Each rail follows the 14.05 ft of sloping surface and has a 12 inch level extension at each end, so buy for 33 lineal feet across the two sides.
14 inch rise at each slope
| Slope | Ramp length (run) | Along the surface | Percent | Angle | Runs | Footprint with landings |
|---|---|---|---|---|---|---|
| 1:12 (ADA maximum) | 14 ft | 14.05 ft | 8.3% | 4.8° | 1 | 19 ft |
| 1:16 | 18.67 ft | 18.70 ft | 6.2% | 3.6° | 1 | 23.67 ft |
| 1:20 | 23.33 ft | 23.36 ft | 5.0% | 2.9° | 1 | 28.33 ft |
The footprint adds a 5 ft landing at the top. Allow 5 ft of clear, level space at the bottom too: with it the 1:12 ramp needs 24 ft from end to end. That bottom space is not in the concrete estimate below.
Is my ramp too steep for 14 inches?
Slope is rise ÷ run. For a 14 inch rise, a ramp shorter than 14 ft is steeper than 1:12:
| Ramp length | Slope | Percent | Angle | Within 1:12? |
|---|---|---|---|---|
| 10 ft | 1:8.6 | 11.7% | 6.7° | No, 4 ft too short |
| 12 ft | 1:10.3 | 9.7% | 5.6° | No, 2 ft too short |
| 14 ft | 1:12 | 8.3% | 4.8° | Yes |
| 18 ft | 1:15.4 | 6.5% | 3.7° | Yes |
Materials for the 14 ft ramp
A wood ramp 14 ft long and 36 inches wide takes 30 rows of 5/4×6 deck boards laid across it, 99 lineal feet with 10% extra, on 4 joists per run at 16 inch centers (62 lineal feet). The 4 inch concrete for the top landing is 0.34 cubic yards, about 16 bags of 80 lb mix. Built 48 inches wide, the decking rises to 132 lineal feet on the same 4 joists per run. Handrails on both sides, with a 12 inch level extension at the top and bottom of the run, come to 33 lineal feet of rail. Posts, brackets and footings are not in these figures.
Ramp length for nearby rises
| Rise | 1:12 | 1:16 | 1:20 | Runs | Footprint at 1:12 |
|---|---|---|---|---|---|
| 10 in | 10 ft | 13.33 ft | 16.67 ft | 1 | 15 ft |
| 12 in | 12 ft | 16 ft | 20 ft | 1 | 17 ft |
| 14 in | 14 ft | 18.67 ft | 23.33 ft | 1 | 19 ft |
| 16 in | 16 ft | 21.33 ft | 26.67 ft | 1 | 21 ft |
| 18 in | 18 ft | 24 ft | 30 ft | 1 | 23 ft |
Coming down steps instead of a measured height? See a ramp for 1 step or a ramp for 2 steps, or read the ramp length and slope guide.
Want to change anything else? The calculator above is the full Wheelchair Ramp Calculator: edit any number and the results update instantly.
Tools & materials for this project
Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.
Frequently asked questions
How long does a wheelchair ramp need to be for a 14 inch rise?
14 ft at the 1:12 maximum slope, because every inch of rise needs 12 inches of ramp. With the landings it takes up 19 ft. At 1:16 the ramp is 18.67 ft and at 1:20 it is 23.33 ft.
Is a 12 foot ramp OK for a 14 inch rise?
No. 14 inches over 12 feet is 1:10.3, a 9.7% slope at 5.6°, steeper than the 1:12 maximum. It is 2 ft too short.
What is the slope of a 14 ft ramp with a 14 inch rise?
1:12, which is 8.3% or 4.8 degrees. Divide the rise by the run in the same unit: 14 ÷ 168 inches = 0.0833.
Related sizes and guides
Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.