How Much Flooring for a 10x14 Room?

A 10 × 14 ft room is 140 ft². With 10% waste you need 154.0 ft² of flooring, which is 8 boxes at 20 ft² per box.

Jump to your result ↓

Your project

Extra tile or planks for cuts and broken pieces. Straight rooms need the least; diagonal or patterned layouts need more.

ft²

On the box. Planks usually come 15 to 25 ft² per box.

$

Example only. Use your quote.

Results

Example job shown. Change the numbers to match yours.

Boxes to buy
8 boxes
160.0 ft² in total
Flooring needed (with waste)
154.0 ft²
Room area
140.0 ft²

Cost

Estimated material costFor the 8 whole boxes you buy (160.0 ft²), not just the 140.0 ft² floor area, at $3.00 per ft². Change the price box to your quote
$480.00
  • Assumptions used: 10% waste added; 20 ft² per box, rounded up to whole boxes; $3.00 per ft² for the cost (an example price, so use your quote).
  • Waste covers cuts at walls and doorways, bad pieces, and the last-row trimming. Buy an extra box if you may want to repair the floor later.

Blueprint

10 ft14 ft

154 ft² to buy · 8 boxes

Flooring for a 10 × 14 ft room (140 ft²)

Box counts depend on how much each box holds, which is printed on the box (20 to 25 ft² is common for laminate and vinyl plank).

Layout and wasteFlooring to buyBoxes at 20 ft²Boxes at 24 ft²Boxes at 30 ft²
5% (Straight, simple room)147.0 ft²875
7% (Typical room)149.8 ft²875
10% (Diagonal or many cuts)154.0 ft²876
15% (Herringbone or patterns)161.0 ft²976

Before you buy

Measure into doorways and closets, and buy one extra box for future repairs, since dye lots vary. Let the flooring acclimate in the room for as long as the maker says. See the waste factors guide.

Laying it out: rows and the last row

Planks usually run along the long wall (14 ft here), so they stack up across the 10 ft side, which is 120 inches. A last row that is only a sliver looks bad and can lift, so check it before you start. With 48 inch planks you need about 4 planks per row.

Plank widthRows acrossWidth of the last rowCheck
5 in plank240.0 inNo sliver
7 in plank181.0 inToo thin: trim the first row
9 in plank143.0 inFine

If the last row comes out under 2 inches, cut the first row narrower so that the first and last rows are about the same. Leave the expansion gap the maker specifies (usually about 1/4 to 1/2 inch) around the walls.

A 10 × 14 room: let the planks run the long way

A 10 × 14 ft room is 140 sq ft, so order 154.0 sq ft with a 10% allowance. That is 8 boxes of 20 sq ft or 7 boxes of 24 sq ft.

With one side noticeably longer, running the planks down the 14 ft length gives long unbroken lines and fewer rows to start and finish. Use the cut-off from the end of one row to begin the next as long as it is longer than the minimum the maker gives, and the real waste in a plain rectangle like this is often below the allowance. Bedrooms this shape usually have the closet on a short wall, so add its floor.

Want to change anything else? The calculator above is the full Flooring Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many boxes of flooring for a 10x14 room?

8 boxes at 20 ft² per box, including 10% waste (154.0 ft² needed for 140 ft² of floor). With 24 ft² boxes it is 7.

How much extra flooring should I buy for a 10x14 room?

5 to 10% for a simple straight layout, and 15% for diagonal or herringbone. For this room, 10% adds 14.0 ft².

How many square feet is a 10x14 room?

140 square feet (10 × 14). Add other rooms, hallways and closets you will floor, and measure into doorways.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.