What Size AC for 300 Square Feet?

A 300 ft² room needs about 7,000 BTU of cooling. Shop for an 8,000 BTU air conditioner (0.7 tons). Adjust below for sun, ceiling height, people and kitchens.

Jump to your result ↓

Your project

people

Results

Example job shown. Change the numbers to match yours.

Cooling capacity needed
7,000 BTU/hr
Standard unit size to shop for
8,000 BTU
In tons of cooling
0.58 tons

How we got there

Room area
300 ft²
Base capacity for this area
7,000 BTU/hr
Adjustments (sun, ceiling, people, kitchen)
0 BTU/hr
  • Based on the Energy Star room-size chart, with typical adjustments for sun, ceiling height, occupancy and kitchens. If the room opens onto another space, size for both. Do not oversize: a unit that is too big cools quickly, shuts off, and leaves the air clammy.

Blueprint

17.3 ft17.3 ft8 ft ceiling

7,000 BTU of cooling

What changes the size for a 300 ft² room

300 ft² is about 17 × 17 ft, or 30 × 10 ft, or 25 × 12 ft. The base capacity is for an average room, and the table adjusts it for the things that add or remove heat:

ConditionsBTU neededShop for
Average room (2 people, 8 ft ceiling)7,000 BTU8,000 BTU
Heavily shaded room6,300 BTU8,000 BTU
Very sunny room7,700 BTU8,000 BTU
4 people regularly in the room8,200 BTU10,000 BTU
It is a kitchen11,000 BTU12,000 BTU
10 ft ceilings8,800 BTU10,000 BTU

What kind of air conditioner is that?

A unit this size is a small window air conditioner or a small portable unit, and it runs on a standard 120 V household outlet.

Bigger is not better: an oversized unit cools the room quickly, shuts off, and leaves it clammy. See the full sizing guide for window, portable and mini-split options.

What it costs to run

An 8,000 BTU window or portable unit with a typical efficiency (EER about 11) draws roughly 727 watts when the compressor is running, which is 6.1 amps at 120 V. At 17 cents per kWh that is about $0.12 an hour.

Hours of cooling a dayCost per month (30 days)
4 hours$15
8 hours$30
12 hours$45

These assume the compressor runs the whole time. In practice it cycles on and off, so a well-sized unit costs less than this. A higher efficiency rating (EER or CEER) lowers the cost directly: a unit with an EER of 13 uses about 15% less.

A 300 sq ft room: where unit sizes begin to round up

For 300 sq ft, the calculation comes to about 7,000 BTU/hr, and the nearest standard size is 8,000 BTU, which is 0.7 tons. The standard size is slightly larger than the calculated load, and that is fine.

Standard sizes come in steps, and it is normal to round up to the next one if the figure falls between two. Do not round up by two steps, or the unit will short-cycle. A window unit of this size may need a dedicated 120 V circuit, so check the plug type and the amp rating before you buy.

Want to change anything else? The calculator above is the full AC Size Calculator (BTU): edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

What size air conditioner for 300 square feet?

About 7,000 BTU per hour, so shop for an 8,000 BTU unit. That unit is 0.7 tons of cooling. The load comes from Energy Star room-size guidance for an average room.

Is an 8,000 BTU air conditioner enough for 300 sq ft?

Yes for an average room with 8 ft ceilings and two people. A very sunny room would need about 7,700 BTU, and a kitchen about 11,000 BTU, so size up in those cases.

What if my 300 sq ft room has high ceilings?

With 10 ft ceilings, the same 300 ft² needs about 8,800 BTU (10,000 BTU), because there is more air to cool.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.