How Many Gallons in a 14x28 Pool?

A 14 × 28 ft rectangular pool holds about 14,662 gallons at a 5 ft average depth, and 11,729 gallons at 4 ft. Find your own average depth, then use the table or the calculator.

Jump to your result ↓

Your project

The 8 is an example for an in-ground pool with a deep end; a round pool ignores it until you type your own. For an above-ground pool or any flat bottom, clear the box (or enter 0) and put the water depth in the shallow end box.

gal/min

A garden hose delivers about 5 to 10 gallons a minute.

Results

Example job shown. Change the numbers to match yours.

Pool volume
14,662 US gallons
Flat floor: the deep end is the same as the shallow end
Liters
55,501 L
Cubic feet
1,960 ft³
Water surface area
392 ft²
Average depth
5.00 ft

Filling

Time to fill with a hose (hours)
27.2 hours
Time to fill with a hose (days)
1.1 days
  • Volume = surface area × average depth × 7.48 gallons per cubic foot. Oval pools use 0.7854 (π ÷ 4) times a rectangle of the same length and width. Kidney pools use the trade rule of thumb area = (A + B) × length × 0.45, good to roughly 5 to 10%. Other freeform pools are harder to estimate: use the average of several measurements.

Blueprint

14 ft28 ft

14,662 gallons

Gallons in a 14 × 28 ft pool, by average depth

For a pool with a sloping floor, find the average depth first: (shallow end + deep end) ÷ 2. The surface area is 392 ft². The fill time is for a hose delivering 9 gallons per minute.

Average depthGallonsLitersHose fill time
3.5 ft10,26338,85119.0 hrs
4 ft11,72944,40121.7 hrs
4.5 ft13,19649,95124.4 hrs
5 ft14,66255,50127.2 hrs
5.5 ft16,12861,05129.9 hrs
6 ft17,59466,60132.6 hrs

Why you need the number

Pool chemical doses are given per number of gallons, and pumps, filters and heaters are sized to the volume. Measure the actual water depth in your own pool and follow the label on any product you add.

Water weight, pump size and fill cost

At 14,662 gallons, this pool holds about 122,280 lb of water (61.1 tons). That is a lot of weight on one patch of ground, which is why the base must be level and well compacted before you fill it.

To turn the whole volume over through the filter in 8 hours, the pump and filter need to move at least 30.5 gallons per minute (40.7 GPM for a 6-hour turnover). If a chemical label gives a dose per 10,000 gallons, multiply it by 1.47 for this pool.

Water price per 1,000 galCost to fill
$4$59
$6$88
$8$117

Water prices vary a lot, and some utilities charge a separate sewer rate that does not apply to a pool. Check your own bill.

A 14 × 28 ft pool: a step up in length

A 14 × 28 ft rectangular pool holds 14,662 gallons at a 5 ft average depth, and 11,729 gallons at 4 ft. The surface is 392 sq ft, and the water at 5 ft weighs about 122,280 lb. This is a typical size for a pool with a shallow end and a deep end.

Because few pools are one depth throughout, use the average of the shallow and deep ends for the volume, and check it against the shallow and deep inputs in the calculator. A sloped floor and a deep end for diving change the figure noticeably. The pump needs about 31 gallons a minute for a turnover in eight hours, and filling takes 27.2 hours from a hose.

Shallow end and deep end: what the slope does

The 5 ft average depth used on this page gives 14,662 gallons, but a floor that runs steadily from 3.5 ft at the shallow end to 6 ft at the deep end averages 4.75 ft and holds 13,929 gallons. If the deep end drops to 8 ft the average is 5.75 ft and the volume rises to 16,861 gallons, which is 2,199 more than the page figure.

The averaging only works for a floor that slopes evenly. A pool with a long flat shallow shelf and a short, steep drop holds less than the average of its two ends suggests, because only a small part of it is deep. Measure the depth at several points along the length, average the readings, and enter that figure as both the shallow and deep depth in the calculator.

Want to change anything else? The calculator above is the full Pool Volume Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many gallons in a 14x28 pool?

It depends on the average depth: about 11,729 gallons at 4 ft, 14,662 at 5 ft and 17,594 at 6 ft. For a sloping bottom, use the average of the shallow and deep ends.

How do I find the average depth of a 14x28 pool?

Add the depth at the shallow end to the depth at the deep end and divide by two. A pool that is 3½ ft at one end and 8 ft at the other averages 5¾ ft, which holds 16,861 gallons at this size.

How long to fill a 14x28 pool with a hose?

At 9 gallons per minute, a 14x28 pool with a 5 ft average depth takes about 27 hours (1.1 days). Many owners have water delivered for pools this size.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.