How Many Shingles for a 40x60 House?

A 40 × 60 ft house with a 6/12 roof and 12 in overhangs needs about 97 bundles of shingles, which is 32.0 roofing squares with 10% waste. Change the pitch below, since steeper roofs need more.

Jump to your result ↓

Your project

Pick the second choice if you already have the roof surface in square feet (from a measurement, a quote or an aerial report). The footprint and pitch are then not needed.

How steep the roof is: inches of rise for every 12 inches across. 6/12 is a typical gentle roof. If unsure, 6/12 is a safe guess; a steeper roof has more surface.

Extra shingles for cuts at the edges, ridge and valleys. A plain two-sided roof needs the least; more corners and valleys need more.

A "square" is 100 square feet of roof. Most shingles come 3 bundles to a square. Check the label on the bundle.

Results

Example job shown. Change the numbers to match yours.

Shingle bundles to buy
97 bundles
Includes your waste factor
What to buy
  • Synthetic underlayment (1,000 ft² rolls, 10% laps)4 rolls
  • Roofing nailsAbout 320 a square on the 32.0 squares to order, rounded up to the next 100: follow the nailing pattern on the shingle wrapper10,300 nails
Roof area, in squares
29.1 squares
Roof area
2,911 ft²
Squares to order (with waste)
32.0 squares
Slope multiplier
1.118 × footprint
  • One roofing square is 100 ft² of roof. Most shingles come three bundles to a square.
  • This assumes a gable or hip roof over the whole footprint. Dormers, valleys, chimneys and separate roof sections add to the total, so measure them separately.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

40 ft60 ft9 of 97 shown

29.1 squares of roof · 97 bundles

Shingles for a 40 × 60 ft house, by roof pitch

This is a large house with a footprint of about 2,400 ft². With 12 in overhangs the roof footprint is 2604 ft² (42 × 62 ft). A sloped roof is larger than its footprint, so the steeper it is the more shingles it needs. Bundles include 10% waste at three per square:

PitchRoof areaSquaresBundles (10% waste)
4/122,745 ft²27.491
6/122,911 ft²29.197
8/123,130 ft²31.3104
10/123,390 ft²33.9112
12/123,683 ft²36.8122

How waste changes the order (6/12 pitch)

WasteSquares to orderBundles
10%32.097
15%33.5101
20%34.9105

What is not in these numbers

These figures assume a simple gable or hip roof over the whole footprint. Dormers, valleys, chimneys, porches and garages add area. Starter strips, ridge caps, drip edge, flashing and nails are also bought separately. See the roofing squares guide for the full list.

Weight, nails and edge metal

Architectural shingles weigh about 60 to 80 lb a bundle, so 97 bundles are roughly 6,790 lb (3.4 tons) to lift onto the roof, which is the hard part of the job. Spread bundles across the roof's rafters, never stacked in one spot.

At about 320 nails a square (four per shingle), a 29.1 square roof uses around 9,316 nails, which is a 25 lb box or a couple of coils for a nail gun. For a simple gable roof, drip edge runs about 80 ft along the eaves and 134 ft up the rakes, which is roughly 22 pieces of 10 ft.

A 40 × 60 ft house: a large roof to get measured

A 40 × 60 ft footprint has roughly 2,911 sq ft of roof at 6/12 pitch, 29.1 squares, or 97 bundles with 10% waste. At 2,400 sq ft of floor it is a large house, and the roof will have wings, valleys and dormers that add to the totals.

For a roof like this, do not rely on the calculator alone: measure every plane. The calculator gives a good first estimate for a simple shape, and then your plane-by-plane count shows how much extra the valleys, dormers and hips add. Use that to compare quotes and to order materials in one batch so the shingle color matches across the whole roof.

Want to change anything else? The calculator above is the full Roofing Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many bundles of shingles for a 40x60 house?

For a simple roof at 6/12 pitch with 12 in overhangs and 10% waste, about 97 bundles (32.0 squares at three bundles per square). Steeper roofs need more, as the table shows.

How many squares of roofing is a 40x60 house?

The roof is about 29.1 squares at 6/12 pitch (2,911 ft²), or 32.0 squares with 10% waste. One square is 100 ft² of roof.

How many rolls of underlayment for a 40x60 roof?

About 4 rolls of 1,000 ft² synthetic underlayment at 6/12 pitch, including 10% for laps.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.