How Many Shingles for a 36x50 House?

A 36 × 50 ft house with a 6/12 roof and 12 in overhangs needs about 73 bundles of shingles, which is 24.3 roofing squares with 10% waste. Change the pitch below, since steeper roofs need more.

Jump to your result ↓

Your project

Pick the second choice if you already have the roof surface in square feet (from a measurement, a quote or an aerial report). The footprint and pitch are then not needed.

How steep the roof is: inches of rise for every 12 inches across. 6/12 is a typical gentle roof. If unsure, 6/12 is a safe guess; a steeper roof has more surface.

Extra shingles for cuts at the edges, ridge and valleys. A plain two-sided roof needs the least; more corners and valleys need more.

A "square" is 100 square feet of roof. Most shingles come 3 bundles to a square. Check the label on the bundle.

Results

Example job shown. Change the numbers to match yours.

Shingle bundles to buy
73 bundles
Includes your waste factor
What to buy
  • Synthetic underlayment (1,000 ft² rolls, 10% laps)3 rolls
  • Roofing nailsAbout 320 a square on the 24.3 squares to order, rounded up to the next 100: follow the nailing pattern on the shingle wrapper7,800 nails
Roof area, in squares
22.1 squares
Roof area
2,209 ft²
Squares to order (with waste)
24.3 squares
Slope multiplier
1.118 × footprint
  • One roofing square is 100 ft² of roof. Most shingles come three bundles to a square.
  • This assumes a gable or hip roof over the whole footprint. Dormers, valleys, chimneys and separate roof sections add to the total, so measure them separately.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

36 ft50 ft9 of 73 shown

22.1 squares of roof · 73 bundles

Shingles for a 36 × 50 ft house, by roof pitch

This is a ranch, or the footprint of a 2-story house of about 1,800 ft² per floor. With 12 in overhangs the roof footprint is 1976 ft² (38 × 52 ft). A sloped roof is larger than its footprint, so the steeper it is the more shingles it needs. Bundles include 10% waste at three per square:

PitchRoof areaSquaresBundles (10% waste)
4/122,083 ft²20.869
6/122,209 ft²22.173
8/122,375 ft²23.779
10/122,572 ft²25.785
12/122,794 ft²27.993

How waste changes the order (6/12 pitch)

WasteSquares to orderBundles
10%24.373
15%25.477
20%26.580

What is not in these numbers

These figures assume a simple gable or hip roof over the whole footprint. Dormers, valleys, chimneys, porches and garages add area. Starter strips, ridge caps, drip edge, flashing and nails are also bought separately. See the roofing squares guide for the full list.

Weight, nails and edge metal

Architectural shingles weigh about 60 to 80 lb a bundle, so 73 bundles are roughly 5,110 lb (2.6 tons) to lift onto the roof, which is the hard part of the job. Spread bundles across the roof's rafters, never stacked in one spot.

At about 320 nails a square (four per shingle), a 22.1 square roof uses around 7,070 nails, which is a 25 lb box or a couple of coils for a nail gun. For a simple gable roof, drip edge runs about 72 ft along the eaves and 112 ft up the rakes, which is roughly 19 pieces of 10 ft.

A 36 × 50 ft house: a wide ranch or a two-story footprint

A 36 × 50 ft footprint has about 2,209 sq ft of roof at 6/12 pitch, which is 22.1 squares and 73 bundles with 10% waste. If the house is two stories, the roof is still sized by the footprint, but working at that height raises the cost and the risk.

On a two-story house the roof is a job for a crew with proper fall protection and a roof-top delivery, because carrying shingles up two stories on a ladder is dangerous. Get a roof-top delivery by boom truck and plan the staging, and make sure the people on the roof wear harnesses attached to a secure anchor.

Want to change anything else? The calculator above is the full Roofing Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many bundles of shingles for a 36x50 house?

For a simple roof at 6/12 pitch with 12 in overhangs and 10% waste, about 73 bundles (24.3 squares at three bundles per square). Steeper roofs need more, as the table shows.

How many squares of roofing is a 36x50 house?

The roof is about 22.1 squares at 6/12 pitch (2,209 ft²), or 24.3 squares with 10% waste. One square is 100 ft² of roof.

How many rolls of underlayment for a 36x50 roof?

About 3 rolls of 1,000 ft² synthetic underlayment at 6/12 pitch, including 10% for laps.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.