How Many Tiles for 300 Square Feet?

300 square feet needs 324 tiles if they are 12 × 12 in with 1/8 in joints and 10% waste. Smaller tiles need many more, as the table shows, along with grout and thinset.

Jump to your result ↓

Your project

The gap between tiles that the grout fills. It is set by the spacers you use; 1/8 in is typical for floor tile.

How thick the tile is, on the box. It sets how much thin-set and grout you need.

%

10% is standard. Use 15% for diagonal layouts or large-format tile.

tiles

Printed on the box.

Coverage of a 50 lb bag in ft².

Results

Example job shown. Change the numbers to match yours.

Tiles needed
324 tiles
Includes your waste allowance
What to buy
  • Boxes33 boxes
  • 50 lb bags of thinset5 bags
  • 25 lb bags1 bag
  • 10 lb bags3 bags
Area to tile
300.0 ft²

Grout

Grout
23.5 lb
  • Assumptions used: 10% waste added; 12 × 12 in tiles with 0.125 in joints; 65 ft² of thinset per 50 lb bag; grout at 20% extra.
  • Grout is estimated from joint volume plus 20% for waste, uneven tile backs and clean-up. Thinset coverage varies with the trowel, the tile back and the substrate, so check the bag. Large tiles may need back-buttering, which uses more.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

324 tiles12 of 324 shown12 × 12 in tile

324 tiles · 12 drawn

Tiles for 300 square feet, by tile size

Counts include 10% waste. Grout includes 20% for waste and uneven backs. Thinset is in 50 lb bags at the notch size usual for that tile.

TileJointTiles neededGroutThinset bags
3 × 6 in subway1/16 in256023.5 lb4
4 × 4 in1/8 in279346.9 lb4
6 × 6 in1/8 in126746.9 lb4
12 × 12 in1/8 in32423.5 lb5
12 × 24 in1/8 in16317.6 lb5
24 × 24 in3/16 in8223.5 lb7

Planning the job

Buy all your tile at once from one lot, and add 15% for a diagonal layout or large-format tile. Check the floor is flat before laying big tiles. See the tile, grout and thinset guide for the full method.

What this much tile costs and covers

300 ft² is a whole living area or several rooms. Buying 10% extra means 330 ft² of tile. Tile prices run from a couple of dollars to well over ten dollars a square foot, so the material cost swings widely:

Tile price per ft²Tile cost for 330 ft²
$2$660
$4$1,320
$8$2,640
$12$3,960

Add thinset, grout, backer board, spacers and tools, and labor if you hire it. Large-format tiles have fewer joints to grout but need a flatter floor.

Three hundred square feet: a project to plan like a contractor

300 sq ft of 12 × 12 in tile, with 10% waste, takes 324 tiles, 33 boxes of 10, 5 bags of thinset and 23.5 lb of grout. That is the floor of a small house, and a job that takes a few weekends for a careful amateur.

The quantity is large enough that checking several boxes for color and size variation before you start is sensible: mix tiles from different boxes as you lay them to avoid blocks of shade. Tile and thinset together make a heavy load, so check that the structure can carry it. Think about whether a professional installer, who can finish faster, is worth the cost.

Want to change anything else? The calculator above is the full Tile Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many 12x12 tiles for 300 square feet?

324 tiles with 1/8 in joints and 10% waste, which is 33 boxes of 10.

How many tiles for 300 square feet?

It depends on tile size: 324 of 12 × 12 in, 82 of 24 × 24 in, 1267 of 6 × 6 in, or 2560 of 3 × 6 in subway tile, with 10% waste.

How much grout for 300 square feet?

About 23.5 lb for 12 × 12 in tiles (1/8 in joints), but 94 lb or more for 2 × 2 in mosaics. Smaller tiles mean far more grout.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.