How Many Tiles for 50 Square Feet?

50 square feet needs 54 tiles if they are 12 × 12 in with 1/8 in joints and 10% waste. Smaller tiles need many more, as the table shows, along with grout and thinset.

Jump to your result ↓

Your project

The gap between tiles that the grout fills. It is set by the spacers you use; 1/8 in is typical for floor tile.

How thick the tile is, on the box. It sets how much thin-set and grout you need.

%

10% is standard. Use 15% for diagonal layouts or large-format tile.

tiles

Printed on the box.

Coverage of a 50 lb bag in ft².

Results

Example job shown. Change the numbers to match yours.

Tiles needed
54 tiles
Includes your waste allowance
What to buy
  • Boxes6 boxes
  • 50 lb bags of thinset1 bag
  • 25 lb bags1 bag
  • 10 lb bags1 bag
Area to tile
50.0 ft²

Grout

Grout
3.9 lb
  • Assumptions used: 10% waste added; 12 × 12 in tiles with 0.125 in joints; 65 ft² of thinset per 50 lb bag; grout at 20% extra.
  • Grout is estimated from joint volume plus 20% for waste, uneven tile backs and clean-up. Thinset coverage varies with the trowel, the tile back and the substrate, so check the bag. Large tiles may need back-buttering, which uses more.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

54 tiles12 of 54 shown12 × 12 in tile

54 tiles · 12 drawn

Tiles for 50 square feet, by tile size

Counts include 10% waste. Grout includes 20% for waste and uneven backs. Thinset is in 50 lb bags at the notch size usual for that tile.

TileJointTiles neededGroutThinset bags
3 × 6 in subway1/16 in4273.9 lb1
4 × 4 in1/8 in4667.8 lb1
6 × 6 in1/8 in2127.8 lb1
12 × 12 in1/8 in543.9 lb1
12 × 24 in1/8 in282.9 lb1
24 × 24 in3/16 in143.9 lb2

Planning the job

Buy all your tile at once from one lot, and add 15% for a diagonal layout or large-format tile. Check the floor is flat before laying big tiles. See the tile, grout and thinset guide for the full method.

What this much tile costs and covers

50 ft² is about the size of a bathroom floor or a tub surround and shower walls. Buying 10% extra means 55 ft² of tile. Tile prices run from a couple of dollars to well over ten dollars a square foot, so the material cost swings widely:

Tile price per ft²Tile cost for 55 ft²
$2$110
$4$220
$8$440
$12$660

Add thinset, grout, backer board, spacers and tools, and labor if you hire it. Large-format tiles have fewer joints to grout but need a flatter floor.

Fifty square feet: a bathroom floor or a kitchen backsplash

50 sq ft of 12 × 12 in tile, with 10% waste, takes 54 tiles, 6 boxes of 10, 1 bag of thinset and 3.9 lb of grout. It is a bathroom floor, a laundry room or a large backsplash and tub surround together.

On a small job the cuts are a large share of the total. Every wall, tub and toilet flange creates a cut, so start in the middle of the room and plan the layout so that no border tile is less than half a tile wide. Buy an extra box if the tile is a special order, as matching a dye lot later is hard.

Want to change anything else? The calculator above is the full Tile Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many 12x12 tiles for 50 square feet?

54 tiles with 1/8 in joints and 10% waste, which is 6 boxes of 10.

How many tiles for 50 square feet?

It depends on tile size: 54 of 12 × 12 in, 14 of 24 × 24 in, 212 of 6 × 6 in, or 427 of 3 × 6 in subway tile, with 10% waste.

How much grout for 50 square feet?

About 3.9 lb for 12 × 12 in tiles (1/8 in joints), but 16 lb or more for 2 × 2 in mosaics. Smaller tiles mean far more grout.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.