How Much Flooring for a 15x20 Room?

A 15 × 20 ft room is 300 ft². With 10% waste you need 330.0 ft² of flooring, which is 17 boxes at 20 ft² per box.

Jump to your result ↓

Your project

Extra tile or planks for cuts and broken pieces. Straight rooms need the least; diagonal or patterned layouts need more.

ft²

On the box. Planks usually come 15 to 25 ft² per box.

$

Example only. Use your quote.

Results

Example job shown. Change the numbers to match yours.

Boxes to buy
17 boxes
340.0 ft² in total
Flooring needed (with waste)
330.0 ft²
Room area
300.0 ft²

Cost

Estimated material costFor the 17 whole boxes you buy (340.0 ft²), not just the 300.0 ft² floor area, at $3.00 per ft². Change the price box to your quote
$1,020.00
  • Assumptions used: 10% waste added; 20 ft² per box, rounded up to whole boxes; $3.00 per ft² for the cost (an example price, so use your quote).
  • Waste covers cuts at walls and doorways, bad pieces, and the last-row trimming. Buy an extra box if you may want to repair the floor later.

Blueprint

15 ft20 ft9 of 17 shown

330 ft² to buy · 17 boxes

Flooring for a 15 × 20 ft room (300 ft²)

Box counts depend on how much each box holds, which is printed on the box (20 to 25 ft² is common for laminate and vinyl plank).

Layout and wasteFlooring to buyBoxes at 20 ft²Boxes at 24 ft²Boxes at 30 ft²
5% (Straight, simple room)315.0 ft²161411
7% (Typical room)321.0 ft²171411
10% (Diagonal or many cuts)330.0 ft²171411
15% (Herringbone or patterns)345.0 ft²181512

Before you buy

Measure into doorways and closets, and buy one extra box for future repairs, since dye lots vary. Let the flooring acclimate in the room for as long as the maker says. See the waste factors guide.

Laying it out: rows and the last row

Planks usually run along the long wall (20 ft here), so they stack up across the 15 ft side, which is 180 inches. A last row that is only a sliver looks bad and can lift, so check it before you start. With 48 inch planks you need about 5 planks per row.

Plank widthRows acrossWidth of the last rowCheck
5 in plank360.0 inNo sliver
7 in plank265.0 inFine
9 in plank200.0 inNo sliver

If the last row comes out under 2 inches, cut the first row narrower so that the first and last rows are about the same. Leave the expansion gap the maker specifies (usually about 1/4 to 1/2 inch) around the walls.

A 15 × 20 room: a very large single room

A 15 × 20 ft room is 300 sq ft, which is 17 boxes at 20 sq ft each with 10% waste. A floor this big takes careful planning for the expansion: many floating floors have a maximum run in one direction, often around 30 to 40 feet, after which a T-molding is needed.

Check the manufacturer's installation guide for the maximum span and for any requirement for a vapor barrier. With a large open room, think about where the light falls, as planks laid along the direction of the main windows hide the joints. Acclimatize the boxes in the room for the recommended time before you start.

Want to change anything else? The calculator above is the full Flooring Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many boxes of flooring for a 15x20 room?

17 boxes at 20 ft² per box, including 10% waste (330.0 ft² needed for 300 ft² of floor). With 24 ft² boxes it is 14.

How much extra flooring should I buy for a 15x20 room?

5 to 10% for a simple straight layout, and 15% for diagonal or herringbone. For this room, 10% adds 30.0 ft².

How many square feet is a 15x20 room?

300 square feet (15 × 20). Add other rooms, hallways and closets you will floor, and measure into doorways.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.