How Much Topsoil for 2000 Square Feet?

2000 square feet of topsoil at 4 inches deep needs 27.16 cubic yards, about 29.9 tons, including 10% for settling. The table shows other depths.

Jump to your result ↓

Your project

%

Soil settles after watering. 10% is a sensible buffer.

Results

Example job shown. Change the numbers to match yours.

Soil needed
27.16 cubic yards
Includes your waste allowance
What to buy
  • 1 ft³ bags734 bags
  • 2 ft³ bags367 bags
Cubic feet
733.3 ft³
Approximate weight
29.88 tons
  • Assumptions used: 10% waste added; 1.1 tons per yd³ for the weight.
  • Weights are typical. Wet soil can weigh 30 to 50% more than dry soil, so check your truck or trailer capacity.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

44.7 ft44.7 ft4 in367 × 2 ft³ bags10 of 367 shown

27.16 yd³ · 367 bags

Topsoil for 2000 square feet, by depth

All figures include 10% for settling. Weight is for typical topsoil at about 1.1 tons per cubic yard.

DepthCubic yardsCubic feetApprox. tonsBags (2 ft³)
1 in6.791837.592
2 in13.5836714.9184
4 in27.1673329.9367
6 in40.741,10044.8550

Buying tips

Screened topsoil costs more but is smoother and has fewer stones. Check that it is not full of clay or sand, and avoid soil with a sour smell. A standard pickup can carry about 1 to 1.5 yd³ of soil. For raised beds use our raised bed calculator.

How many loads is that?

59,753 lb of topsoil is 3 dump-truck loads (a tandem dump carries about 10 tons). A half-ton pickup can carry about a ton of dense material at most, and often less, so check your truck's payload rating (on the sticker in the door jamb) instead of guessing.

If you are moving it by hand, 733 ft³ is about 184 wheelbarrow loads (about 4 ft³ each).

Two thousand square feet: a landscaping project

2,000 sq ft at 4 inches deep takes 27.16 cubic yards with 10% extra, a major delivery, and a lot to move by hand. Many people hire a landscaper or rent a skid steer for spreading, and the cost is worth comparing with the cost of the soil itself.

A project of this size should be planned in a sequence: strip or kill the old surface, add the soil in thick layers, grade, then seed or sod. Test the soil: a lab test for pH and nutrients costs little and tells you what to add. Order the soil from one source so the texture is the same all over the lawn.

Want to change anything else? The calculator above is the full Topsoil Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How much topsoil for 2000 square feet?

At 4 inches deep with 10% extra, 27.16 cubic yards (about 29.9 tons). At 2 inches it is 13.58 yd³, and at 6 inches 40.74 yd³.

How many bags of topsoil for 2000 square feet?

At 4 inches, 734 bags of 1 ft³, or 367 bags of 2 ft³. For more than about half a yard, bulk is usually cheaper.

How deep should topsoil be for a lawn?

Four to six inches for a new lawn, and 1 to 2 inches when topdressing an existing one. Raised beds and vegetable gardens do better with 6 to 12 inches of loosened soil.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.