Brick Calculator (UK)

A single-skin brick wall takes 60 bricks per m² and a one-brick-thick wall 120, so a 10 m² wall needs 630 single-skin bricks with 5% waste and 6 bags of cement for the mortar. Enter your wall below for your own count, sand and cement.

UK edition. In Canada or the US? Use the US and Canada version (feet, inches and US gallons).

Jump to your result ↓

Your project

%

Cuts and breakage. 5% is typical for a plain wall.

Results

Example job shown. Change the numbers to match yours.

Bricks to order
630 bricks
Includes your waste allowance
Net wall area
10.0 m²
Bricks without waste
600 bricks
Packs of 500
2 packs

Mortar (1 : 4 cement to building sand)

Building sand
0.56 tonnes
Bags of cement (25 kg)
6 bags
  • Counts are for standard bricks (215 × 102.5 × 65 mm) laid with 10 mm joints. The mortar figures are a rule of thumb of about 0.9 tonnes of sand and 8 bags of cement per 1,000 bricks, which includes some waste. Your mix and the mortar joint depth will change it. Add lime or a plasticiser if your bricklayer advises it.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

5 m2 m

630 bricks

How this calculator works

A standard UK brick is 215 × 102.5 × 65 mm. With a 10 mm mortar joint, each brick covers 225 × 75 mm of wall face, which is about 59 bricks per square metre. We use 60 for a single skin, and 120 for a wall that is one brick (215 mm) thick, which has two layers in its thickness. Multiply by the net wall area, and add your waste allowance.

bricks = (length × height − openings) × 60 (or 120) × (1 + waste %)

Worked example: a 5 m long, 2 m high single-skin garden wall is 10 m², so 600 bricks, or 630 with 5% waste. That needs about 0.56 tonnes of building sand and 6 bags of 25 kg cement.

Assumptions and sources

The assumptions behind your numbers (waste, sizes, rates) are listed in the notes directly under your results, and they update when you change an input.

The formula and a worked example are shown above, so you can check any result by hand. Read how we calculate and check our numbers. Results are estimates for planning: supplier products vary, so check the size printed on the label.

Bricks for common garden walls

Standard bricks with 10 mm joints and 5% extra, no openings. A half-brick wall is one brick thick (102.5 mm); a one-brick wall is two skins (215 mm). The sand and cement are for the half-brick wall. The garden wall guide covers footings and piers.

Wall (length × height)Half-brick wallOne-brick wallBuilding sandCement (25 kg)
3 × 1 m1893780.17 t2
5 × 1 m3156300.28 t3
8 × 1 m5041,0080.45 t5
4 × 2 m5041,0080.45 t5
5 × 2 m6301,2600.56 t6
10 × 2 m1,2602,5201.12 t11

Tips before you buy

  • Choose the mortar to suit the brick: a mix that is stronger than the bricks makes the wall crack through the bricks, and not the joints.
  • Buy all the bricks for the job together. Colours vary between batches, and the mix of bricks from different pallets gives a better blend.
  • A freestanding garden wall over about 1 m high needs piers or an engineer's advice, and walls next to a highway or over 2 m may need planning permission.
  • Work from a string line, and check each course with a spirit level. A damp-proof course is needed at the base of any wall that is attached to a building.
  • Mix the mortar in small batches, so that it does not go off before you use it.

Quick answers by size

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many bricks per square metre?

About 60 for a single skin of standard bricks with 10 mm joints, and 120 for a wall that is one brick thick.

How many bricks do I need for a 5m x 2m wall?

600 for a single skin, and about 630 with 5% for waste. A one-brick-thick wall needs twice that.

How much sand and cement do I need for 1,000 bricks?

About 0.9 tonnes of building sand and 8 bags of 25 kg cement for a 1:4 mix, as a rule of thumb.

What size is a standard UK brick?

215 mm long, 102.5 mm wide and 65 mm high. A 10 mm mortar joint is added on each course and each end.

How many bricks are in a pack?

It varies by maker and brick, so check with your merchant. The calculator counts packs of 500 as a planning figure; the bricks per m² chart lists bricks by wall area.

Should I use bricks or blocks for a garden wall?

Blocks are quicker to lay: a 5 × 2 m wall is 104 blocks against 630 bricks for a half-brick wall. Concrete blocks are often rendered or clad, while facing bricks are left as they are. Compare with the block calculator and the concrete blocks guide.

Add this calculator to your website

Running a blog, a contractor site or a class page? You can put this calculator on it for free. Copy the code below, and please leave the link underneath the calculator in place. The small script just resizes the frame to fit the results; if your site strips scripts, the calculator still works inside a scrolling frame.

Get the embed code

Related calculators & guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check the Building Regulations and your supplier's guidance before ordering.