Furnace size for 1,500 square feet, by climate
The heat output the house needs, and the input rating of the furnace to buy at 96% and at 80% efficiency (AFUE). Standard furnace inputs are 40,000 to 140,000 BTU/hr.
| Climate | Rule of thumb | Output needed (BTU/hr) | Furnace at 96% AFUE | Furnace at 80% AFUE |
|---|---|---|---|---|
| Very hot (zone 1) | 25 BTU/ft² | 37,500 | 40,000 | 60,000 |
| Hot (zone 2) | 30 BTU/ft² | 45,000 | 60,000 | 60,000 |
| Warm (zone 3) | 35 BTU/ft² | 52,500 | 60,000 | 80,000 |
| Mixed (zone 4) | 40 BTU/ft² | 60,000 | 80,000 | 80,000 |
| Cool (zone 5) | 45 BTU/ft² | 67,500 | 80,000 | 100,000 |
| Cold (zone 6) | 50 BTU/ft² | 75,000 | 80,000 | 100,000 |
| Very cold (zone 7+) | 60 BTU/ft² | 90,000 | 100,000 | 120,000 |
Before you buy
These are rule-of-thumb figures. A contractor should do a Manual J load calculation, which accounts for windows, insulation and air leakage, because an oversized furnace short-cycles, wastes fuel and heats unevenly. Insulating the attic first can shrink the furnace you need: see the attic insulation calculator.
How much fuel it burns
At its full firing rate, an 80,000 BTU/hr furnace burns about 0.80 therms of natural gas an hour (a therm is 100,000 BTU), or 0.87 gallons of propane, or 0.58 gallons of heating oil. It does not fire constantly: on a mild day it may run a third of the time, so a season's fuel use depends on your climate and how well the house holds heat.
Ducts matter as much as the furnace. Leaky or undersized ducts in an unheated attic or crawl space can waste a fifth of the heat before it reaches the rooms, so ask the installer to check them.
A 1,500 sq ft home: a common furnace size
For 1,500 sq ft in a mixed climate, the heat output needed comes to about 60,000 BTU/hr, which suggests an 80,000 BTU/hr furnace at 96% efficiency. This is a typical size for a ranch house or a small two-story.
Compare the size with the air conditioner, because the two share the ductwork and the blower. A furnace that is matched to the ducts will deliver air quietly and at the right temperature, while one that is too big for the ducts is noisy and uneven. If you are replacing an old furnace, the size of the old one is a clue, but houses that have been insulated and sealed since may need a smaller one.
Want to change anything else? The calculator above is the full Furnace Size Calculator: edit any number and the results update instantly.
Tools & materials for this project
Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.
Frequently asked questions
What size furnace for 1,500 square feet?
In a mixed climate (40 BTU per ft²), about 60,000 BTU/hr of heat, which is an 80,000 BTU input furnace at 96% efficiency (80,000 BTU input at 80%).
How many BTUs to heat 1,500 square feet?
Between 37,500 BTU/hr in a very hot climate and 90,000 BTU/hr in a very cold one. Insulation, windows and ceiling height move it up or down.
Does a poorly insulated 1,500 sq ft house need a bigger furnace?
Yes: the estimate rises about 15%, to 69,000 BTU/hr in a mixed climate. Sealing and insulating first is usually cheaper than a bigger furnace.
Related sizes and guides
Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.