What Size Furnace for 2,000 Square Feet?

A 2,000 ft² house in a mixed climate needs about 80,000 BTU/hr of heat, which is a 100,000 BTU furnace at 96% efficiency. The table gives the size for every climate.

Jump to your result ↓

Your project

Results

Example job shown. Change the numbers to match yours.

Furnace size to shop for (input rating)
100,000 BTU/hr
Heat the house needs (output)
80,000 BTU/hr
Input rating needed at 96% AFUE
83,333 BTU/hr
In kilowatts of heat
23.4 kW
  • This is a rule-of-thumb estimate based on BTU per square foot by climate. A proper sizing uses a Manual J load calculation by a contractor, which accounts for windows, insulation, air leakage and ductwork. An oversized furnace short-cycles, wastes fuel and gives uneven heat.

Blueprint

44.7 ft44.7 ft8 ft ceilings

83,333 BTU/hr input

Furnace size for 2,000 square feet, by climate

The heat output the house needs, and the input rating of the furnace to buy at 96% and at 80% efficiency (AFUE). Standard furnace inputs are 40,000 to 140,000 BTU/hr.

ClimateRule of thumbOutput needed (BTU/hr)Furnace at 96% AFUEFurnace at 80% AFUE
Very hot (zone 1)25 BTU/ft²50,00060,00080,000
Hot (zone 2)30 BTU/ft²60,00080,00080,000
Warm (zone 3)35 BTU/ft²70,00080,000100,000
Mixed (zone 4)40 BTU/ft²80,000100,000100,000
Cool (zone 5)45 BTU/ft²90,000100,000120,000
Cold (zone 6)50 BTU/ft²100,000120,000140,000
Very cold (zone 7+)60 BTU/ft²120,000140,000Over 140,000: two furnaces or a custom system

Before you buy

These are rule-of-thumb figures. A contractor should do a Manual J load calculation, which accounts for windows, insulation and air leakage, because an oversized furnace short-cycles, wastes fuel and heats unevenly. Insulating the attic first can shrink the furnace you need: see the attic insulation calculator.

How much fuel it burns

At its full firing rate, a 100,000 BTU/hr furnace burns about 1.00 therms of natural gas an hour (a therm is 100,000 BTU), or 1.09 gallons of propane, or 0.72 gallons of heating oil. It does not fire constantly: on a mild day it may run a third of the time, so a season's fuel use depends on your climate and how well the house holds heat.

Ducts matter as much as the furnace. Leaky or undersized ducts in an unheated attic or crawl space can waste a fifth of the heat before it reaches the rooms, so ask the installer to check them.

A 2,000 sq ft home: the middle of the market

For 2,000 sq ft in a mixed climate, the heat output needed is about 80,000 BTU/hr, so a 100,000 BTU/hr furnace at 96% efficiency. It is the size of a typical newer house, and the number most installers will quote.

A house of this size often has two floors, and a single furnace can leave one floor warmer than the other. Zoning dampers, or a second system, help with the balance. Check the duct design, because the best furnace cannot make up for undersized ducts or leaks in an attic or crawl space, which can waste a large share of the heat.

Want to change anything else? The calculator above is the full Furnace Size Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

What size furnace for 2,000 square feet?

In a mixed climate (40 BTU per ft²), about 80,000 BTU/hr of heat, which is a 100,000 BTU input furnace at 96% efficiency (100,000 BTU input at 80%).

How many BTUs to heat 2,000 square feet?

Between 50,000 BTU/hr in a very hot climate and 120,000 BTU/hr in a very cold one. Insulation, windows and ceiling height move it up or down.

Does a poorly insulated 2,000 sq ft house need a bigger furnace?

Yes: the estimate rises about 15%, to 92,000 BTU/hr in a mixed climate. Sealing and insulating first is usually cheaper than a bigger furnace.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.