How Many Lights for a 6 Foot Christmas Tree?

A 6 ft Christmas tree needs about 600 lights at the standard 100 per foot, which is 6 strands of 100 (or 2 strands of 300). A fuller tree at 150 per foot needs 900 lights.

Jump to your result ↓

Your project

Allow about 1 ft for the tree stand and the topper.

The spacing, or the lit length, is printed on the box. It sets how many feet of string the lights make.

Results

Example job shown. Change the numbers to match yours.

Lights needed
600 lights
For a 6.0 ft tree
Tree light strands to buyStrands of 100 lights
6 strands
Lights you will have
600 lights
Length of lit stringAll 600 lights you will have, at 4.0 in between bulbs, before the lead to the outlet
200 ft

Does it fit?

Largest tree for this ceiling
6.0 ft
Your tree
Fits, with room for a stand and topper
  • The usual rule is 100 lights for every foot of tree height, and more for a fuller look. LED lights run cooler and use far less power than incandescent ones. Check the maximum number of strands you can connect end to end on the box.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

7 ft6 ft

600 lights · 6 strands

Lights for a 6 ft tree, by how full you want it

This is a slim or medium tree that fits an 8 ft ceiling comfortably. Pick the fullness you want, then the strand size. Buying fewer, longer strands means fewer connections and plugs.

FullnessLightsStrands of 100Strands of 200Strands of 300
50 per foot300321
100 per foot600632
150 per foot900953
200 per foot1,2001264

How many feet of lights for a 6 ft tree

Strands are also sold by lit length. At 100 lights per foot the 6 strands of 100 a 6 ft tree needs make 125 ft of string at 2.5 in spacing, 200 ft of string at 4 in spacing, 300 ft of string at 6 in spacing. Wider spacing gives a longer string for the same bulb count, so check the box before you compare prices.

Fitting it under the ceiling

A 6 ft tree needs a ceiling of about 7.0 to 7.5 ft once you add the stand and a topper. See the full Christmas lights guide for a ceiling-to-tree-height chart, and the circuit load calculator to check how many strands one outlet can run.

Power and plugs

600 lights is 6 strands of 100. On LED strands (about 5 W each) that is only 30 watts in total, which is about 2% of a 15 amp circuit's safe load. The same lights in old-style incandescent strands (about 40 W each) draw 240 watts, which is 17% of the circuit, and the strands run hot.

Check the maximum number of strands you can connect end to end: older incandescent sets often allow only 3, which would need 2 outlets or splitters here. Many LED sets allow dozens. See the circuit load calculator if you are also lighting the outside.

A 6 ft tree: fits an 8 ft ceiling

A 6 ft tree takes about 600 lights at 100 per foot, which is 6 strands of 100, with 200 ft of lit string at 4 in spacing.

This height leaves comfortable space under a standard ceiling for the stand and a topper. At this size, the trunk-to-tip method works well: run each strand up a branch to the tip and back, and then fill in the gaps. Plug the strands into one power strip with a switch, so that one switch turns the whole tree on.

Strand sizes for a 6 ft tree

A 6 ft tree needs 600 lights at 100 per foot. That is 12 strands of 50, 6 of 100, 3 of 200 or 2 of 300. Bigger strands cut down on plugs and joins but are harder to wrap neatly.

Mixing sizes works well: use a long strand for the wide bottom of the tree and shorter ones near the top, where the branches are close together. Lay the strands out on the floor first to check that they all reach.

Want to change anything else? The calculator above is the full Christmas Tree Lights Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many lights for a 6 foot Christmas tree?

About 600 lights at the standard 100 per foot, which is 6 strands of 100. For a fuller look at 150 per foot, 900 lights.

How many strands of lights for a 6 foot tree?

6 strands of 100 lights, 3 strands of 200, or 2 strands of 300, at 100 lights per foot.

What length of lights for a 6 ft Christmas tree?

6 strands of 100 make about 200 ft of lit string with bulbs 4 in apart, 125 ft at 2.5 in and 300 ft at 6 in. The spacing or lit length is printed on the box.

What ceiling height do I need for a 6 foot tree?

At least 7.0 to 7.5 ft, to leave room for the stand and a topper. Measure from the floor to the ceiling before you buy.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.