How Many Sheets of Drywall for a 12x12 Room?

A 12 × 12 ft room with 8 ft ceilings needs 19 sheets of 4 × 8 ft drywall for the walls and ceiling, or 14 sheets for the walls only, including 10% waste.

Jump to your result ↓

Your project

Use room size if you know the wall lengths and ceiling height. Use total square footage if you already have the wall area.

The size of drywall sheet you will buy. 4 × 8 ft is the easiest to carry; 4 × 12 ft means fewer seams.

%

Cuts around doors, windows and corners. 10% is standard.

Results

Example job shown. Change the numbers to match yours.

Sheets of drywall
19 sheets
Includes your waste allowance
What to buy
  • Screws (about 1 per ft² of board)608 screws
  • Joint tape: 250 ft rolls1 roll
  • Joint compound: 4.5 gal boxes2 boxes
Area to cover
528 ft²

Finishing supplies

Joint tape
195 ft
Joint compound (about 1 gal per 100 ft²)
5.3 gallons
  • Doors and windows are not deducted, because the cut-outs are offset by waste. Supplies are rules of thumb: your tape, mud and screw choices will change the numbers.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

12 ft8 ft+ ceiling9 of 19 shown

19 sheets · 528 ft²

Drywall for a 12 × 12 ft room

With 8 ft ceilings, the walls are 384 ft² and the ceiling 144 ft². Sheet counts include 10% waste; supplies are rules of thumb.

What you hangArea4×8 sheets4×12 sheetsJoint compoundJoint tape
Walls only384 ft²1493.8 gal142 ft
Walls and ceiling528 ft²19135.3 gal195 ft
Ceiling only144 ft²541.4 gal53 ft

Hanging tips

Hang the ceiling first, then the walls, running sheets horizontally. Stagger the joints, use about one screw per square foot, and tape and mud every seam in three coats. Use moisture-resistant board in bathrooms and fire-rated (5/8 in Type X) in garages and next to furnaces. See the drywall calculator to adjust for your ceilings.

Hauling, studs and screws

A ½ inch 4 × 8 sheet weighs about 55 lb, so the 19 sheets for the walls and ceiling weigh roughly 1,045 lb (0.52 tons). Most pickups can take a few sheets flat, but a full order is a delivery, or several trips. Carry them on edge, and use a helper.

The walls are 48 ft around, which is about 40 studs at 16 inch centers (the corners add a few). Plan on roughly one screw per square foot, which is 608 screws for this order.

A 12 × 12 room: a square layout with the best yield

A square 12 × 12 room needs 19 sheets of 4 × 8 drywall. Twelve feet divides evenly into 4 ft widths, so with 12 ft sheets run horizontally the layout wastes very little board.

Since the sheets fit so neatly, the main work is in the cutouts: outlets, switches, windows and doors. Measure each from the last finished sheet rather than the plan. For the ceiling a drywall lift (a rental tool) pays for itself in a room this size, and it saves your arms and the board.

Want to change anything else? The calculator above is the full Drywall Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many sheets of drywall for a 12x12 room?

19 sheets of 4 × 8 ft for the walls and ceiling with 8 ft ceilings and 10% waste, or 14 for the walls only. With 4 × 12 ft sheets it is 13 for both.

How much joint compound for a 12x12 room?

About 5.3 gallons for the walls and ceiling as a rule of thumb (1 gallon per 100 ft²), so buy 2 boxes of 4.5 gallons.

Do I subtract windows and doors for drywall?

Not usually. The cut-outs are offset by the waste allowance, and you need the cutoffs for filling around openings.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.