How Many Sheets of Drywall for a 12x14 Room?

A 12 × 14 ft room with 8 ft ceilings needs 21 sheets of 4 × 8 ft drywall for the walls and ceiling, or 15 sheets for the walls only, including 10% waste.

Jump to your result ↓

Your project

Use room size if you know the wall lengths and ceiling height. Use total square footage if you already have the wall area.

The size of drywall sheet you will buy. 4 × 8 ft is the easiest to carry; 4 × 12 ft means fewer seams.

%

Cuts around doors, windows and corners. 10% is standard.

Results

Example job shown. Change the numbers to match yours.

Sheets of drywall
21 sheets
Includes your waste allowance
What to buy
  • Screws (about 1 per ft² of board)672 screws
  • Joint tape: 250 ft rolls1 roll
  • Joint compound: 4.5 gal boxes2 boxes
Area to cover
584 ft²

Finishing supplies

Joint tape
216 ft
Joint compound (about 1 gal per 100 ft²)
5.8 gallons
  • Doors and windows are not deducted, because the cut-outs are offset by waste. Supplies are rules of thumb: your tape, mud and screw choices will change the numbers.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

12 ft8 ft+ ceiling9 of 21 shown

21 sheets · 584 ft²

Drywall for a 12 × 14 ft room

With 8 ft ceilings, the walls are 416 ft² and the ceiling 168 ft². Sheet counts include 10% waste; supplies are rules of thumb.

What you hangArea4×8 sheets4×12 sheetsJoint compoundJoint tape
Walls only416 ft²15104.2 gal154 ft
Walls and ceiling584 ft²21145.8 gal216 ft
Ceiling only168 ft²641.7 gal62 ft

Hanging tips

Hang the ceiling first, then the walls, running sheets horizontally. Stagger the joints, use about one screw per square foot, and tape and mud every seam in three coats. Use moisture-resistant board in bathrooms and fire-rated (5/8 in Type X) in garages and next to furnaces. See the drywall calculator to adjust for your ceilings.

Hauling, studs and screws

A ½ inch 4 × 8 sheet weighs about 55 lb, so the 21 sheets for the walls and ceiling weigh roughly 1,155 lb (0.58 tons). Most pickups can take a few sheets flat, but a full order is a delivery, or several trips. Carry them on edge, and use a helper.

The walls are 52 ft around, which is about 43 studs at 16 inch centers (the corners add a few). Plan on roughly one screw per square foot, which is 672 screws for this order.

A 12 × 14 room: where long sheets start to help

A 12 × 14 room takes 21 sheets of 4 × 8. At this size the walls have enough length that 12 ft sheets begin to pay off, because one sheet can span most of a wall and so leave one seam instead of two or three.

If you do use 12 ft sheets, make sure you can get them into the house: they need straight stair runs and wide doors, and they take two people to carry. Some suppliers will deliver them to the room if you ask. Plan the ceiling seams to run across the joists, not along them.

Want to change anything else? The calculator above is the full Drywall Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many sheets of drywall for a 12x14 room?

21 sheets of 4 × 8 ft for the walls and ceiling with 8 ft ceilings and 10% waste, or 15 for the walls only. With 4 × 12 ft sheets it is 14 for both.

How much joint compound for a 12x14 room?

About 5.8 gallons for the walls and ceiling as a rule of thumb (1 gallon per 100 ft²), so buy 2 boxes of 4.5 gallons.

Do I subtract windows and doors for drywall?

Not usually. The cut-outs are offset by the waste allowance, and you need the cutoffs for filling around openings.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.