How Many Sheets of Drywall for a 10x12 Room?

A 10 × 12 ft room with 8 ft ceilings needs 17 sheets of 4 × 8 ft drywall for the walls and ceiling, or 13 sheets for the walls only, including 10% waste.

Jump to your result ↓

Your project

Use room size if you know the wall lengths and ceiling height. Use total square footage if you already have the wall area.

The size of drywall sheet you will buy. 4 × 8 ft is the easiest to carry; 4 × 12 ft means fewer seams.

%

Cuts around doors, windows and corners. 10% is standard.

Results

Example job shown. Change the numbers to match yours.

Sheets of drywall
17 sheets
Includes your waste allowance
What to buy
  • Screws (about 1 per ft² of board)544 screws
  • Joint tape: 250 ft rolls1 roll
  • Joint compound: 4.5 gal boxes2 boxes
Area to cover
472 ft²

Finishing supplies

Joint tape
175 ft
Joint compound (about 1 gal per 100 ft²)
4.7 gallons
  • Doors and windows are not deducted, because the cut-outs are offset by waste. Supplies are rules of thumb: your tape, mud and screw choices will change the numbers.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

10 ft8 ft+ ceiling9 of 17 shown

17 sheets · 472 ft²

Drywall for a 10 × 12 ft room

With 8 ft ceilings, the walls are 352 ft² and the ceiling 120 ft². Sheet counts include 10% waste; supplies are rules of thumb.

What you hangArea4×8 sheets4×12 sheetsJoint compoundJoint tape
Walls only352 ft²1393.5 gal130 ft
Walls and ceiling472 ft²17114.7 gal175 ft
Ceiling only120 ft²531.2 gal44 ft

Hanging tips

Hang the ceiling first, then the walls, running sheets horizontally. Stagger the joints, use about one screw per square foot, and tape and mud every seam in three coats. Use moisture-resistant board in bathrooms and fire-rated (5/8 in Type X) in garages and next to furnaces. See the drywall calculator to adjust for your ceilings.

Hauling, studs and screws

A ½ inch 4 × 8 sheet weighs about 55 lb, so the 17 sheets for the walls and ceiling weigh roughly 935 lb (0.47 tons). Most pickups can take a few sheets flat, but a full order is a delivery, or several trips. Carry them on edge, and use a helper.

The walls are 44 ft around, which is about 37 studs at 16 inch centers (the corners add a few). Plan on roughly one screw per square foot, which is 544 screws for this order.

A 10 × 12 room: a common bedroom

A 10 × 12 room takes 17 sheets of 4 × 8 for walls and ceiling at an 8 ft ceiling. The 12 ft wall is where 12 ft sheets are tempting: they reduce the number of seams on a long wall, but they are heavy and awkward to maneuver.

Staggering the seams is the main skill in a room this size: do not let wall seams line up with the corners of door and window openings, which is where cracks start. Order a few extra sheets for mistakes, and if the room is a bedroom consider thicker (5/8 inch) drywall on the ceiling to prevent sagging between joists.

Want to change anything else? The calculator above is the full Drywall Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many sheets of drywall for a 10x12 room?

17 sheets of 4 × 8 ft for the walls and ceiling with 8 ft ceilings and 10% waste, or 13 for the walls only. With 4 × 12 ft sheets it is 11 for both.

How much joint compound for a 10x12 room?

About 4.7 gallons for the walls and ceiling as a rule of thumb (1 gallon per 100 ft²), so buy 2 boxes of 4.5 gallons.

Do I subtract windows and doors for drywall?

Not usually. The cut-outs are offset by the waste allowance, and you need the cutoffs for filling around openings.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.