How Many Sheets of Drywall for a 10x10 Room?

A 10 × 10 ft room with 8 ft ceilings needs 15 sheets of 4 × 8 ft drywall for the walls and ceiling, or 11 sheets for the walls only, including 10% waste.

Jump to your result ↓

Your project

Use room size if you know the wall lengths and ceiling height. Use total square footage if you already have the wall area.

The size of drywall sheet you will buy. 4 × 8 ft is the easiest to carry; 4 × 12 ft means fewer seams.

%

Cuts around doors, windows and corners. 10% is standard.

Results

Example job shown. Change the numbers to match yours.

Sheets of drywall
15 sheets
Includes your waste allowance
What to buy
  • Screws (about 1 per ft² of board)480 screws
  • Joint tape: 250 ft rolls1 roll
  • Joint compound: 4.5 gal boxes1 box
Area to cover
420 ft²

Finishing supplies

Joint tape
155 ft
Joint compound (about 1 gal per 100 ft²)
4.2 gallons
  • Doors and windows are not deducted, because the cut-outs are offset by waste. Supplies are rules of thumb: your tape, mud and screw choices will change the numbers.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

10 ft8 ft+ ceiling9 of 15 shown

15 sheets · 420 ft²

Drywall for a 10 × 10 ft room

With 8 ft ceilings, the walls are 320 ft² and the ceiling 100 ft². Sheet counts include 10% waste; supplies are rules of thumb.

What you hangArea4×8 sheets4×12 sheetsJoint compoundJoint tape
Walls only320 ft²1183.2 gal118 ft
Walls and ceiling420 ft²15104.2 gal155 ft
Ceiling only100 ft²431.0 gal37 ft

Hanging tips

Hang the ceiling first, then the walls, running sheets horizontally. Stagger the joints, use about one screw per square foot, and tape and mud every seam in three coats. Use moisture-resistant board in bathrooms and fire-rated (5/8 in Type X) in garages and next to furnaces. See the drywall calculator to adjust for your ceilings.

Hauling, studs and screws

A ½ inch 4 × 8 sheet weighs about 55 lb, so the 15 sheets for the walls and ceiling weigh roughly 825 lb (0.41 tons). Most pickups can take a few sheets flat, but a full order is a delivery, or several trips. Carry them on edge, and use a helper.

The walls are 40 ft around, which is about 34 studs at 16 inch centers (the corners add a few). Plan on roughly one screw per square foot, which is 480 screws for this order.

A 10 × 10 room is the smallest full bedroom

15 sheets of 4 × 8 drywall cover the walls and ceiling of a 10 × 10 room with an 8 ft ceiling, and the ceiling alone is about 3.1 sheets of that. A project this small is easy to carry up the stairs and fit through a doorway if you cut the sheets down.

In a 10 × 10 room, plan which seams will fall on which studs. In a small room, a few full sheets and a handful of small cuts are less waste than you might expect. Finishing takes longer than hanging: three coats of joint compound with drying time in between.

Want to change anything else? The calculator above is the full Drywall Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many sheets of drywall for a 10x10 room?

15 sheets of 4 × 8 ft for the walls and ceiling with 8 ft ceilings and 10% waste, or 11 for the walls only. With 4 × 12 ft sheets it is 10 for both.

How much joint compound for a 10x10 room?

About 4.2 gallons for the walls and ceiling as a rule of thumb (1 gallon per 100 ft²), so one 4.5 gallon box is enough.

Do I subtract windows and doors for drywall?

Not usually. The cut-outs are offset by the waste allowance, and you need the cutoffs for filling around openings.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.