How Many Shingles for a 24x24 House?

A 24 × 24 ft house with a 6/12 roof and 12 in overhangs needs about 25 bundles of shingles, which is 8.3 roofing squares with 10% waste. Change the pitch below, since steeper roofs need more.

Jump to your result ↓

Your project

Pick the second choice if you already have the roof surface in square feet (from a measurement, a quote or an aerial report). The footprint and pitch are then not needed.

How steep the roof is: inches of rise for every 12 inches across. 6/12 is a typical gentle roof. If unsure, 6/12 is a safe guess; a steeper roof has more surface.

Extra shingles for cuts at the edges, ridge and valleys. A plain two-sided roof needs the least; more corners and valleys need more.

A "square" is 100 square feet of roof. Most shingles come 3 bundles to a square. Check the label on the bundle.

Results

Example job shown. Change the numbers to match yours.

Shingle bundles to buy
25 bundles
Includes your waste factor
What to buy
  • Synthetic underlayment (1,000 ft² rolls, 10% laps)1 roll
  • Roofing nailsAbout 320 a square on the 8.3 squares to order, rounded up to the next 100: follow the nailing pattern on the shingle wrapper2,700 nails
Roof area, in squares
7.6 squares
Roof area
756 ft²
Squares to order (with waste)
8.3 squares
Slope multiplier
1.118 × footprint
  • One roofing square is 100 ft² of roof. Most shingles come three bundles to a square.
  • This assumes a gable or hip roof over the whole footprint. Dormers, valleys, chimneys and separate roof sections add to the total, so measure them separately.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

24 ft24 ft9 of 25 shown

7.6 squares of roof · 25 bundles

Shingles for a 24 × 24 ft house, by roof pitch

This is a small cabin, a two-car garage or a modest cottage. With 12 in overhangs the roof footprint is 676 ft² (26 × 26 ft). A sloped roof is larger than its footprint, so the steeper it is the more shingles it needs. Bundles include 10% waste at three per square:

PitchRoof areaSquaresBundles (10% waste)
4/12713 ft²7.124
6/12756 ft²7.625
8/12812 ft²8.127
10/12880 ft²8.830
12/12956 ft²9.632

How waste changes the order (6/12 pitch)

WasteSquares to orderBundles
10%8.325
15%8.727
20%9.128

What is not in these numbers

These figures assume a simple gable or hip roof over the whole footprint. Dormers, valleys, chimneys, porches and garages add area. Starter strips, ridge caps, drip edge, flashing and nails are also bought separately. See the roofing squares guide for the full list.

Weight, nails and edge metal

Architectural shingles weigh about 60 to 80 lb a bundle, so 25 bundles are roughly 1,750 lb (0.9 tons) to lift onto the roof, which is the hard part of the job. Spread bundles across the roof's rafters, never stacked in one spot.

At about 320 nails a square (four per shingle), a 7.6 square roof uses around 2,419 nails, which is a 25 lb box or a couple of coils for a nail gun. For a simple gable roof, drip edge runs about 48 ft along the eaves and 54 ft up the rakes, which is roughly 11 pieces of 10 ft.

A 24 × 24 ft building: a small cabin or two-car garage

A 24 × 24 ft building has about 756 sq ft of roof at a 6/12 pitch with a 12 inch overhang, which is 7.6 squares and 25 bundles with 10% waste. It is a small, simple roof, often a plain gable, and a good first roofing job.

Because the roof is small, the extra pieces matter: a ridge cap, a starter row and drip edge are separate purchases. A gable roof has no hips or valleys, so waste is low. If it is a garage, check whether it already has more than one layer of shingles, and think about adding a ridge vent if the garage gets hot.

Want to change anything else? The calculator above is the full Roofing Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many bundles of shingles for a 24x24 house?

For a simple roof at 6/12 pitch with 12 in overhangs and 10% waste, about 25 bundles (8.3 squares at three bundles per square). Steeper roofs need more, as the table shows.

How many squares of roofing is a 24x24 house?

The roof is about 7.6 squares at 6/12 pitch (756 ft²), or 8.3 squares with 10% waste. One square is 100 ft² of roof.

How many rolls of underlayment for a 24x24 roof?

About 1 roll of 1,000 ft² synthetic underlayment at 6/12 pitch, including 10% for laps.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.