How Much Fence Do I Need for 200 Feet?

200 feet of 6 ft privacy fence with one 4 ft gate needs 27 posts, 75 rails, 428 pickets and about 46 bags of 80 lb concrete.

Jump to your result ↓

Your project

Distance between fence posts. 8 ft is standard for panels and rails; 6 ft is sturdier for tall or windy fences.

gates

Pickets are individual boards you nail up one by one. Panels are ready-made sections, usually 6 or 8 ft wide.

The real width of the board: a 1×6 is 5.5 in, not 6.

Space between boards. None gives full privacy; a gap lets air through and costs fewer boards.

Results

Example job shown. Change the numbers to match yours.

Posts
27 posts
Includes line, end and gate posts. Each gate adds one post: it hangs between two posts, and one of them is already the end of a fence section
What to buy
  • Rails (one 2×4 per rail per section)75 boards
  • Pickets428 pickets
  • 80 lb bagsFor 4×4 posts in 10 in holes. Includes 10% waste, for the post embed depth below. A gravel layer is extra: dig 6 in deeper46 bags
Post length neededFence height plus the buried depth
8.0 ft
Sections between posts
25 sections

Concrete for post holes

Post embed depth usedConcrete depth. With a 6 in gravel base the hole is dug to 30 in
24 in
  • Assumptions used: pickets 5.5 in wide with a 0 in gap; 3 rails per section; 4×4 posts in 10 in holes, at least 24 in deep; 10% concrete waste; 0.6 ft³ per 80 lb bag.
  • Assumes one run of fence. A corner post is shared by the two sides, so it is counted once. If your fence has several sides, work each out separately, since each side rounds up to a whole number of sections. Gate hardware and fasteners are not counted.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

200 ft6 ft8 of 25 sections shown

200 ft · 27 posts · 25 sections

Materials for 200 feet of fence

All figures assume one 4 ft gate, and 10 in post holes. They are for a straight run, so add a post for each corner.

StylePostsRails (2×4)Pickets80 lb concrete bags
6 ft privacy pickets, 8 ft spacing277542846
6 ft privacy pickets, 6 ft spacing359942860
4 ft pickets, 1.5 in gaps275033646
6 ft prefab panels, 8 ft spacing277525 panels46

Before you build

Check your property line, call 811 before digging, and look at local rules on fence height and permits. Use ground-contact treated posts, and set them about one third of the fence height deep. See the post spacing and depth guide.

How much yard is that?

200 ft of fence fully encloses a square yard about 50 × 50 ft, or a rectangle 50 ft wide and 50 ft deep. If one or more sides run along an existing fence or wall, the same length covers a bigger yard. Where the fence turns a corner, that one post serves both sides.

Before you order, walk the line with a string, mark every gate and corner, and measure again. A gate opening of 4 ft takes out 4 ft of picket, and pickets, rails and posts are bought separately. Check the local rules on fence height, and where the property line really is, before you dig.

Two hundred feet: a whole quarter-acre yard

200 ft of fence encloses a square yard of about 50 ft on a side, or a rectangle of another shape. The count is 27 posts, 75 rails, 428 pickets and 46 bags of concrete, which is a major purchase, and delivery is worth it.

With a total this large, price at least two suppliers, and compare what is included in the quote, such as hardware, gate kits and delivery. Gates are the part of a fence that gives the most trouble, so use heavy hinges and a post that is set deeper than the line posts. Decide which side the fence faces: the finished side usually faces the neighbors.

Want to change anything else? The calculator above is the full Fence Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many fence posts for 200 feet of fence?

27 posts for a 6 ft fence with one 4 ft gate and 8 ft spacing (26 with no gate). Add one more post for each corner.

How many pickets for 200 feet of fence?

428 pickets of 1×6 (5½ in actual) set tight, for the 196 ft of fence either side of a 4 ft gate. Spaced pickets need fewer.

How much concrete for 200 feet of fence?

About 46 bags of 80 lb concrete for 27 posts in 10 in holes, 24 in deep, with 10% waste. Fast-setting 50 lb bags work too (about 1.6 times as many).

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.