How Much Fence Do I Need for 50 Feet?

50 feet of 6 ft privacy fence with one 4 ft gate needs 8 posts, 18 rails, 101 pickets and about 14 bags of 80 lb concrete.

Jump to your result ↓

Your project

Distance between fence posts. 8 ft is standard for panels and rails; 6 ft is sturdier for tall or windy fences.

gates

Pickets are individual boards you nail up one by one. Panels are ready-made sections, usually 6 or 8 ft wide.

The real width of the board: a 1×6 is 5.5 in, not 6.

Space between boards. None gives full privacy; a gap lets air through and costs fewer boards.

Results

Example job shown. Change the numbers to match yours.

Posts
8 posts
Includes line, end and gate posts. Each gate adds one post: it hangs between two posts, and one of them is already the end of a fence section
What to buy
  • Rails (one 2×4 per rail per section)18 boards
  • Pickets101 pickets
  • 80 lb bagsFor 4×4 posts in 10 in holes. Includes 10% waste, for the post embed depth below. A gravel layer is extra: dig 6 in deeper14 bags
Post length neededFence height plus the buried depth
8.0 ft
Sections between posts
6 sections

Concrete for post holes

Post embed depth usedConcrete depth. With a 6 in gravel base the hole is dug to 30 in
24 in
  • Assumptions used: pickets 5.5 in wide with a 0 in gap; 3 rails per section; 4×4 posts in 10 in holes, at least 24 in deep; 10% concrete waste; 0.6 ft³ per 80 lb bag.
  • Assumes one run of fence. A corner post is shared by the two sides, so it is counted once. If your fence has several sides, work each out separately, since each side rounds up to a whole number of sections. Gate hardware and fasteners are not counted.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

gate50 ft6 ft

50 ft · 8 posts · 6 sections

Materials for 50 feet of fence

All figures assume one 4 ft gate, and 10 in post holes. They are for a straight run, so add a post for each corner.

StylePostsRails (2×4)Pickets80 lb concrete bags
6 ft privacy pickets, 8 ft spacing81810114
6 ft privacy pickets, 6 ft spacing102410117
4 ft pickets, 1.5 in gaps8127914
6 ft prefab panels, 8 ft spacing8186 panels14

Before you build

Check your property line, call 811 before digging, and look at local rules on fence height and permits. Use ground-contact treated posts, and set them about one third of the fence height deep. See the post spacing and depth guide.

How much yard is that?

50 ft of fence fully encloses a square yard about 13 × 13 ft. If one or more sides run along an existing fence or wall, the same length covers a bigger yard. Where the fence turns a corner, that one post serves both sides.

Before you order, walk the line with a string, mark every gate and corner, and measure again. A gate opening of 4 ft takes out 4 ft of picket, and pickets, rails and posts are bought separately. Check the local rules on fence height, and where the property line really is, before you dig.

Fifty feet: one side of a yard or a run for the dog

50 ft of fence is a single side of a small yard, a dog run, or the front of a garden. It needs 8 posts, and you can finish it in a weekend with a post-hole digger, a level and a helper.

The number of posts is small, so mistakes are cheap, but straight lines still matter: set the end posts first and run a string between them to line up the rest. Concrete is the main weight to carry, at 14 bags of 80 lb, so buy it where you can load it right next to the work.

Want to change anything else? The calculator above is the full Fence Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many fence posts for 50 feet of fence?

8 posts for a 6 ft fence with one 4 ft gate and 8 ft spacing (8 with no gate). Add one more post for each corner.

How many pickets for 50 feet of fence?

101 pickets of 1×6 (5½ in actual) set tight, for the 46 ft of fence either side of a 4 ft gate. Spaced pickets need fewer.

How much concrete for 50 feet of fence?

About 14 bags of 80 lb concrete for 8 posts in 10 in holes, 24 in deep, with 10% waste. Fast-setting 50 lb bags work too (about 1.6 times as many).

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.