How Much Fence Do I Need for 300 Feet?

300 feet of 6 ft privacy fence with one 4 ft gate needs 39 posts, 111 rails, 646 pickets and about 66 bags of 80 lb concrete.

Jump to your result ↓

Your project

Distance between fence posts. 8 ft is standard for panels and rails; 6 ft is sturdier for tall or windy fences.

gates

Pickets are individual boards you nail up one by one. Panels are ready-made sections, usually 6 or 8 ft wide.

The real width of the board: a 1×6 is 5.5 in, not 6.

Space between boards. None gives full privacy; a gap lets air through and costs fewer boards.

Results

Example job shown. Change the numbers to match yours.

Posts
39 posts
Includes line, end and gate posts. Each gate adds one post: it hangs between two posts, and one of them is already the end of a fence section
What to buy
  • Rails (one 2×4 per rail per section)111 boards
  • Pickets646 pickets
  • 80 lb bagsFor 4×4 posts in 10 in holes. Includes 10% waste, for the post embed depth below. A gravel layer is extra: dig 6 in deeper66 bags
Post length neededFence height plus the buried depth
8.0 ft
Sections between posts
37 sections

Concrete for post holes

Post embed depth usedConcrete depth. With a 6 in gravel base the hole is dug to 30 in
24 in
  • Assumptions used: pickets 5.5 in wide with a 0 in gap; 3 rails per section; 4×4 posts in 10 in holes, at least 24 in deep; 10% concrete waste; 0.6 ft³ per 80 lb bag.
  • Assumes one run of fence. A corner post is shared by the two sides, so it is counted once. If your fence has several sides, work each out separately, since each side rounds up to a whole number of sections. Gate hardware and fasteners are not counted.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

300 ft6 ft8 of 37 sections shown

300 ft · 39 posts · 37 sections

Materials for 300 feet of fence

All figures assume one 4 ft gate, and 10 in post holes. They are for a straight run, so add a post for each corner.

StylePostsRails (2×4)Pickets80 lb concrete bags
6 ft privacy pickets, 8 ft spacing3911164666
6 ft privacy pickets, 6 ft spacing5215064688
4 ft pickets, 1.5 in gaps397450866
6 ft prefab panels, 8 ft spacing3911137 panels66

Before you build

Check your property line, call 811 before digging, and look at local rules on fence height and permits. Use ground-contact treated posts, and set them about one third of the fence height deep. See the post spacing and depth guide.

How much yard is that?

300 ft of fence fully encloses a square yard about 75 × 75 ft, or a rectangle 50 ft wide and 100 ft deep. If one or more sides run along an existing fence or wall, the same length covers a bigger yard. Where the fence turns a corner, that one post serves both sides.

Before you order, walk the line with a string, mark every gate and corner, and measure again. A gate opening of 4 ft takes out 4 ft of picket, and pickets, rails and posts are bought separately. Check the local rules on fence height, and where the property line really is, before you dig.

Three hundred feet: a project in stages

300 ft of fence runs around a yard about 75 ft square, or along the boundary of a larger property. It uses 39 posts and 66 bags of concrete, plus the rails and pickets, and takes several weekends.

Break the job into sections of manageable length: finish each one completely, rather than setting all the posts and leaving the rest. Store materials flat, covered and off the ground, and keep the receipts and the layout in a notebook. For a length like this, check local rules on height and permits, and whether a permit is needed for the gates or for any retaining wall.

Want to change anything else? The calculator above is the full Fence Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many fence posts for 300 feet of fence?

39 posts for a 6 ft fence with one 4 ft gate and 8 ft spacing (39 with no gate). Add one more post for each corner.

How many pickets for 300 feet of fence?

646 pickets of 1×6 (5½ in actual) set tight, for the 296 ft of fence either side of a 4 ft gate. Spaced pickets need fewer.

How much concrete for 300 feet of fence?

About 66 bags of 80 lb concrete for 39 posts in 10 in holes, 24 in deep, with 10% waste. Fast-setting 50 lb bags work too (about 1.6 times as many).

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.