How Much Mulch for 100 Square Feet?

100 square feet of garden bed needs 0.93 cubic yards of mulch at a 3 inch depth. That is 13 bags of 2 ft³ (or 9 bags of 3 ft³). At 2 inches you need 0.62 yd³, and at 4 inches 1.23 yd³.

Jump to your result ↓

Your project

$

Use your supplier's price. The default is just an example.

$

Check your local store. Defaults are examples only.

Results

Example job shown. Change the numbers to match yours.

Mulch needed
0.93 cubic yards
Cubic feet
25.0 ft³

If you buy bags

2 ft³ bags
13 bags
3 ft³ bags
9 bags

Cost comparison

Bulk (delivered or loose)$40.00 a cubic yard (an example price, so use yours)
$37.04
Bagged (2 ft³ bags)$4.50 a bag (an example price, so use yours)
$58.50
Cheaper option
Bulk
  • Assumptions used: no waste or settling allowance added, so round up if the ground is uneven; bags of 2 and 3 ft³.
  • Bulk delivery often has a delivery fee and a minimum order, which this comparison does not include.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

10 ft10 ft3 in13 × 2 ft³ bags10 of 13 shown

0.93 yd³ · 13 bags

Mulch for 100 square feet, by depth

DepthCubic yardsCubic feet2 ft³ bags3 ft³ bags
2 in0.6216.796
3 in0.9325.0139
4 in1.2333.31712

What 100 square feet looks like

  • A square about 10.0 × 10.0 ft.
  • A 4 ft wide border that is 25 ft long, or a 3 ft wide border 33 ft long.
  • A round bed about 11.3 ft across.

Bulk or bags for 100 ft²?

At 0.93 cubic yards, bags are the simplest option. 13 bags of 2 ft³ fits in most cars, and many suppliers charge a delivery fee or have a minimum for bulk that cancels the saving.

Moving and spreading it

A heaped wheelbarrow carries roughly 4 ft³, so 25 ft³ of mulch is about 7 wheelbarrow loads. A full-size pickup bed holds roughly 2 yd³ of mulch, so 0.93 yd³ means a single pickup load will do it. Mulch weighs roughly 400 to 800 lb per cubic yard depending on the type, so the whole job is around 370 to 741 lb, and more if it is wet.

If the bed were a square it would be about 10.0 ft on a side, and its edging would run 40 ft. A bed 25 ft long and 4 ft wide would need 58 ft of edging.

One hundred square feet: a front bed

100 sq ft at 3 inches deep needs 0.93 cubic yards of mulch, or 13 bags of 2 cubic feet. That could be a front-of-house bed or a side garden.

Pull weeds and edge the bed before spreading the mulch, and water the soil first if it is dry. A layer of 2 to 3 inches suppresses weeds and holds moisture, and a thicker layer can smother roots. Bags are practical for this size, but if you plan to refresh the bed each year, compare the bag price with a bulk price from a landscape yard.

Want to change anything else? The calculator above is the full Mulch Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many bags of mulch for 100 square feet?

At the usual 3 inch depth you need 13 bags of 2 ft³ (or 9 bags of 3 ft³). At 2 inches it is 9 bags of 2 ft³, and at 4 inches 17 bags.

How many cubic yards of mulch for 100 square feet?

0.93 cubic yards at 3 inches deep, 0.62 at 2 inches and 1.23 at 4 inches. Round up to the next quarter yard when you order.

How deep should I spread mulch over 100 square feet?

Two to three inches is right for most beds. Keep it a few inches back from tree trunks and stems, and top up with an inch or so each year.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.