How Much Mulch for 300 Square Feet?

300 square feet of garden bed needs 2.78 cubic yards of mulch at a 3 inch depth. That is 38 bags of 2 ft³ (or 25 bags of 3 ft³). At 2 inches you need 1.85 yd³, and at 4 inches 3.70 yd³.

Jump to your result ↓

Your project

$

Use your supplier's price. The default is just an example.

$

Check your local store. Defaults are examples only.

Results

Example job shown. Change the numbers to match yours.

Mulch needed
2.78 cubic yards
Cubic feet
75.0 ft³

If you buy bags

2 ft³ bags
38 bags
3 ft³ bags
25 bags

Cost comparison

Bulk (delivered or loose)$40.00 a cubic yard (an example price, so use yours)
$111.11
Bagged (2 ft³ bags)$4.50 a bag (an example price, so use yours)
$171.00
Cheaper option
Bulk
  • Assumptions used: no waste or settling allowance added, so round up if the ground is uneven; bags of 2 and 3 ft³.
  • Bulk delivery often has a delivery fee and a minimum order, which this comparison does not include.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

17.3 ft17.3 ft3 in38 × 2 ft³ bags10 of 38 shown

2.78 yd³ · 38 bags

Mulch for 300 square feet, by depth

DepthCubic yardsCubic feet2 ft³ bags3 ft³ bags
2 in1.8550.02517
3 in2.7875.03825
4 in3.70100.05034

What 300 square feet looks like

  • A square about 17.3 × 17.3 ft.
  • A 4 ft wide border that is 75 ft long, or a 3 ft wide border 100 ft long.
  • A round bed about 19.5 ft across.

Bulk or bags for 300 ft²?

At 2.78 cubic yards, bulk is almost certainly the better choice. 38 bags would be heavy work and cost far more per cubic foot. Ask your supplier about delivery, and where the truck can tip the pile.

Moving and spreading it

A heaped wheelbarrow carries roughly 4 ft³, so 75 ft³ of mulch is about 19 wheelbarrow loads. A full-size pickup bed holds roughly 2 yd³ of mulch, so 2.78 yd³ means 2 pickup loads, or one bulk delivery. Mulch weighs roughly 400 to 800 lb per cubic yard depending on the type, so the whole job is around 1,111 to 2,222 lb, and more if it is wet.

If the bed were a square it would be about 17.3 ft on a side, and its edging would run 69 ft. A bed 75 ft long and 4 ft wide would need 158 ft of edging.

Three hundred square feet: a full yard refresh

300 sq ft at 3 inches deep requires 2.78 cubic yards of mulch, or 38 bags of 2 cubic feet. This is a whole yard's worth of beds, and the sort of amount that needs a delivery.

If the beds already have mulch, you may only need an inch to refresh the top, which cuts the quantity sharply. Rake the old mulch first to break up any crust, so that water can pass through. Mulch that is too deep can starve roots of air, so measure the existing depth before adding a new layer to it.

Want to change anything else? The calculator above is the full Mulch Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many bags of mulch for 300 square feet?

At the usual 3 inch depth you need 38 bags of 2 ft³ (or 25 bags of 3 ft³). At 2 inches it is 25 bags of 2 ft³, and at 4 inches 50 bags.

How many cubic yards of mulch for 300 square feet?

2.78 cubic yards at 3 inches deep, 1.85 at 2 inches and 3.70 at 4 inches. Round up to the next quarter yard when you order.

How deep should I spread mulch over 300 square feet?

Two to three inches is right for most beds. Keep it a few inches back from tree trunks and stems, and top up with an inch or so each year.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.