Sand Calculator

Enter the size of the area and the depth of sand. You get the cubic yards to order, the weight in tons and the number of bags to buy.

Jump to your result ↓

Your project

%

Settling and spillage. 5% is typical.

Results

Example job shown. Change the numbers to match yours.

Sand needed
1.24 cubic yards
33.6 ft³, including your waste allowance
Cubic feet
33.6 ft³
Weight3,360 lb
1.68 tons
Bags50 lb each
68 bags
Area
64 ft²
  • Sand is sold by the ton or cubic yard in bulk, and by weight in bags (a 50 lb bag of play sand is about 0.5 ft³). Weight changes with moisture: wet sand can weigh 25% more than dry. For a paver base use coarse, washed sand, not play sand.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

8 ft8 ft6 in68 × bags10 of 68 shown

1.24 yd³ · 68 bags

How this calculator works

Multiply the area by the depth, converted to feet, to get cubic feet. Add an allowance for settling, divide by 27 for cubic yards, and multiply by the weight of a cubic foot of sand to get pounds and tons. Dry sand weighs about 100 pounds per cubic foot (1.35 tons per cubic yard), and wet or compacted sand about 125.

cubic feet = area × depth (in) ÷ 12 × (1 + waste %)pounds = cubic feet × density

Worked example: an 8 × 8 ft sandbox filled 6 inches deep is 32 ft³, or 33.6 ft³ with 5% extra (1.24 cubic yards). Dry play sand at 100 lb per ft³ weighs 3,360 lb (1.7 tons), which is 68 bags of 50 lb.

Assumptions and sources

The assumptions behind your numbers (waste, sizes, rates) are listed in the notes directly under your results, and they update when you change an input.

The formula and a worked example are shown above, so you can check any result by hand. Read how we calculate and check our numbers. Results are estimates for planning: supplier products vary, so check the size printed on the label.

Sand for common sandboxes (dry sand, 5% extra)

6 inches deep. Bags are 50 lb.

SandboxCubic feetCubic yardsWeight50 lb bags
4 × 4 ft8.40.310.42 tons17
5 × 5 ft13.10.490.66 tons27
6 × 6 ft18.90.700.95 tons38
8 × 8 ft33.61.241.68 tons68
10 × 10 ft52.51.942.63 tons105

Tips before you buy

  • For a sandbox, use clean play sand (washed and screened), not construction or paver sand, which is sharp and dusty. Cover the box when it is not in use to keep out animals and rain.
  • Under pavers, lay about 1 inch of coarse concrete sand on a compacted gravel base, screeded smooth. Do not use play sand or stone dust there.
  • Bulk sand is far cheaper than bags above about half a cubic yard, but you need somewhere for the truck to drop it and a tarp to cover it.
  • A sandbox 6 to 12 inches deep is usual. Add drainage holes or a layer of landscape fabric under it so it does not become a puddle.
  • Wear a dust mask when handling dry sand in bulk. Silica dust is harmful when breathed in repeatedly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How much sand do I need for a sandbox?

An 8 × 8 ft sandbox filled 6 inches deep takes about 1.2 cubic yards, or about 68 bags of 50 lb with 5% extra.

How many 50 lb bags of sand make a cubic yard?

About 54 bags of dry sand (a cubic yard weighs about 2,700 lb), or about 68 bags of wet sand.

How much does a cubic yard of sand weigh?

About 2,700 lb (1.35 tons) dry, and up to 3,400 lb (1.7 tons) when wet or compacted.

How much sand do I need under pavers?

A 1 inch bedding layer: about 0.3 cubic yards (roughly 830 lb of dry sand) per 100 square feet.

Add this calculator to your website

Running a blog, a contractor site or a class page? You can put this calculator on it for free. Copy the code below, and please leave the link underneath the calculator in place. The small script just resizes the frame to fit the results; if your site strips scripts, the calculator still works inside a scrolling frame.

Get the embed code

Related calculators & guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.