What Size Water Softener for 1 Person?

A household of 1 with 15 grains per gallon of hardness needs about a 16,000 grains water softener, using 1,125 grains per day. The table shows the size for other hardness levels.

Jump to your result ↓

Your project

people
grains per gallon

From a test kit or your water report. To convert mg/L (ppm), divide by 17.1.

ppm

Each ppm of iron adds about 5 grains of effective hardness.

gallons

Results

Example job shown. Change the numbers to match yours.

Softener size to buy
16,000 grains
At 7 days between regenerations
Grains to remove per day
1,125 grains
Capacity needed per cycle
7,875 grains
Effective hardness (with iron)
15.0 gpg
Water used per day
75 gallons
  • Real capacity of a softener depends on the salt dose: you get less than the rated grain capacity at the efficient setting. Water over about 10 ppm of iron or with other contaminants needs other treatment. Also check the flow rate (GPM) for your peak demand.

Blueprint

16k24k32k48k64k7,875

7,875 grains

Softener size for 1 person, by water hardness

Based on 75 gallons per person per day and a 7-day cycle. Find your hardness from a test strip or your water report.

HardnessGrains per dayPer 7-day cycleSoftener size
5 gpg3752,62516,000 grains
10 gpg7505,25016,000 grains
15 gpg1,1257,87516,000 grains
20 gpg1,50010,50016,000 grains
25 gpg1,87513,12516,000 grains
30 gpg2,25015,75016,000 grains

If you also have iron in the water

Using 15 gpg water as the baseline:

IronGrains per daySoftener size
0 ppm1,12516,000 grains
1 ppm1,50016,000 grains
2 ppm1,87516,000 grains
3 ppm2,25016,000 grains

Iron above a few ppm needs other treatment, as well as softening. See the water softener sizing guide for the details.

How often it regenerates

A 16,000 grain unit can soften about 1,067 gallons of 15 gpg water before it needs to regenerate. A household of 1 using about 75 gallons a day would get 14.2 days between regenerations, which is longer than most makers advise, so a smaller unit may regenerate often enough to keep the resin fresh.

Harder water shortens that interval in proportion: at 30 gpg the same unit would regenerate twice as often. Test your water first, since the hardness is what decides the size.

One person: the smallest unit is usually plenty

One person uses about 75 gallons a day, which at 15 grains per gallon is 1,125 grains of hardness to remove daily, or 7,875 grains over a 7 day cycle. A 16,000 grains unit covers that with room to spare.

The smallest softeners on the market are often bigger than one person needs, and that is fine: the controller regenerates only when the capacity is used, so a unit with spare capacity simply waits longer between regenerations. Resin that sits idle for a long time can get sluggish, so choose a unit with a meter that triggers regeneration by actual water use and not on a fixed calendar.

Want to change anything else? The calculator above is the full Water Softener Size Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

What size water softener for 1 person?

At 15 grains per gallon of hardness and a weekly regeneration, 16,000 grains. It ranges from 16,000 grains at 5 gpg to 16,000 at 30 gpg.

How many grains does a household of 1 use per day?

About 1,125 grains per day at 15 gpg (1 × 75 gallons × 15). Divide by the hardness of your own water to adjust.

Does iron change the softener size for 1 person?

Yes. Each 1 ppm of iron adds about 5 gpg of effective hardness. At 2 ppm of iron in 15 gpg water, a household of 1 needs a 16,000 grain unit.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.