What Size Water Softener for 2 People?

A household of 2 with 15 grains per gallon of hardness needs about a 16,000 grains water softener, using 2,250 grains per day. The table shows the size for other hardness levels.

Jump to your result ↓

Your project

people
grains per gallon

From a test kit or your water report. To convert mg/L (ppm), divide by 17.1.

ppm

Each ppm of iron adds about 5 grains of effective hardness.

gallons

Results

Example job shown. Change the numbers to match yours.

Softener size to buy
16,000 grains
At 7 days between regenerations
Grains to remove per day
2,250 grains
Capacity needed per cycle
15,750 grains
Effective hardness (with iron)
15.0 gpg
Water used per day
150 gallons
  • Real capacity of a softener depends on the salt dose: you get less than the rated grain capacity at the efficient setting. Water over about 10 ppm of iron or with other contaminants needs other treatment. Also check the flow rate (GPM) for your peak demand.

Blueprint

16k24k32k48k64k15,750

15,750 grains

Softener size for 2 people, by water hardness

Based on 75 gallons per person per day and a 7-day cycle. Find your hardness from a test strip or your water report.

HardnessGrains per dayPer 7-day cycleSoftener size
5 gpg7505,25016,000 grains
10 gpg1,50010,50016,000 grains
15 gpg2,25015,75016,000 grains
20 gpg3,00021,00024,000 grains
25 gpg3,75026,25032,000 grains
30 gpg4,50031,50032,000 grains

If you also have iron in the water

Using 15 gpg water as the baseline:

IronGrains per daySoftener size
0 ppm2,25016,000 grains
1 ppm3,00024,000 grains
2 ppm3,75032,000 grains
3 ppm4,50032,000 grains

Iron above a few ppm needs other treatment, as well as softening. See the water softener sizing guide for the details.

How often it regenerates

A 16,000 grain unit can soften about 1,067 gallons of 15 gpg water before it needs to regenerate. A household of 2 using about 150 gallons a day would get 7.1 days between regenerations, in the range most makers recommend.

Harder water shortens that interval in proportion: at 30 gpg the same unit would regenerate twice as often. Test your water first, since the hardness is what decides the size.

Two people: a couple or a small household

Two people use about 150 gallons a day, so 2,250 grains of hardness a day at 15 grains per gallon and 15,750 grains over 7 days. A 16,000 grains softener handles that comfortably.

A couple can usually go for a week or more between regenerations with the right unit, which saves salt and water. Think about where it will go: it needs a drain, an electrical outlet, a bypass valve and space to add salt. An unusually high hardness reading, or iron in the water, changes the size, so test the water first, with a kit or a lab, before you buy.

Want to change anything else? The calculator above is the full Water Softener Size Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

What size water softener for 2 people?

At 15 grains per gallon of hardness and a weekly regeneration, 16,000 grains. It ranges from 16,000 grains at 5 gpg to 32,000 at 30 gpg.

How many grains does a household of 2 use per day?

About 2,250 grains per day at 15 gpg (2 × 75 gallons × 15). Divide by the hardness of your own water to adjust.

Does iron change the softener size for 2 people?

Yes. Each 1 ppm of iron adds about 5 gpg of effective hardness. At 2 ppm of iron in 15 gpg water, a household of 2 needs a 32,000 grain unit.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.