How Many Deck Boards for a 12x16 Deck?

A 12 × 16 ft deck (192 ft²) needs about 39 deck boards of 12 ft running the 12 ft way, in 35 rows across the 16 ft side, with 10% waste and 5½ in boards at 1/8 in gaps. That is 468 ft of board bought (39 × 12 ft). Run the boards the 16 ft way instead and it is 29 boards of 16 ft in 26 rows. Underneath it needs 10 joists at 16 in spacing (13 with the boards turned).

Jump to your result ↓

Your project

Usually the side along the house.

The direction joists run.

The real width of the board, not the name. A 5/4×6 or 2×6 deck board measures 5.5 in across.

The small space left between boards so water drains and wood can swell. Treated wood is laid nearly tight because it shrinks as it dries.

The length of the boards at the lumberyard. Longer boards mean fewer joints, but are harder to carry.

Distance from the middle of one joist to the middle of the next. 16 in is the usual choice; use 12 in for diagonal boards.

%

Covers cuts, bad boards and angled ends. Use 15% for diagonal decking.

Results

Example job shown. Change the numbers to match yours.

Deck boards to buy
39 boards
One 12 ft board per 12 ft row, plus waste
What to buy
  • JoistsEach as long as the deck width10 joists
  • Screws (2 per board at each joist)700 screws
Rows of decking across the width
35 rows
Board length bought (39 × 12 ft)No leftover piece: the rows use the boards in full
468 linear ft
Deck surface to cover, rows × length (with waste)Net length laid on the deck, before leftover pieces
462 linear ft
Deck area
192 ft²
  • Assumptions used: 10% waste added; 5.5 in boards with a 0.125 in gap; joists 16 in apart; 2 screws per board at each joist.
  • If your boards are shorter than the deck length, plan for butt joints to land on a joist (use a double joist there), and add boards for the extra cuts.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

12 ft16 ft9 of 10 shown

39 deck boards · 10 joists

Boards for a 12 × 16 ft deck, by board length

A 12 × 16 ft deck is a large family deck with separate dining and seating areas. With 5½ in boards and 1/8 in gaps, and the boards running the 12 ft way, the deck has 35 rows, which is 420 ft of decking before waste. These counts include 10% waste:

Board lengthBoards to buyTotal length bought
8 ft boards58464 ft
10 ft boards47470 ft
12 ft boards39468 ft
16 ft boards39624 ft
20 ft boards39780 ft

Which way do the boards run?

A 12 × 16 ft deck has two board counts, and both are right. Boards run across the joists, so the direction also sets how many joists there are and how long they are.

Boards runRowsBoards to buyJoists (16 in on center)Screws
The 12 ft way (this page)3539 of 12 ft10 of 16 ft700
The 16 ft way2629 of 16 ft13 of 12 ft676

To see the other layout in the calculator, swap the length and the width and pick 16 ft boards. The 12x16 deck material list adds the frame, footings and hardware for both directions.

Waste and layout

LayoutWasteBoards run the 12 ft way, 12 ft boardsBoards run the 16 ft way, 16 ft boards
Straight, careful installer5%3728
Straight (typical)10%3929
Diagonal or picture-frame border15%4130

Joists and screws

Joists run the 16 ft width and are spaced along the 12 ft length.

Joist spacingJoistsScrews
12 in on center13910
16 in on center10700
24 in on center7490

That is just the decking surface, for a 192 ft² deck. Posts, beams, footings, ledger, railings and stairs are extra, and a permit is usually required.

Finishing the surface

Treated lumber should be left to dry for a few weeks to a few months, then cleaned and sealed. At about 200 ft² per gallon, one coat of stain or sealer on this 192 ft² deck takes about 1 gallon, more for the railings and steps (use the deck stain calculator). Composite decking needs no stain, but still wants cleaning.

Decks higher than about 30 inches off the ground, or attached to a house, usually need a building permit, an inspection and a guardrail. Check before you order.

A 12 × 16 ft deck: separate dining and seating areas

A 12 × 16 ft deck is 192 sq ft, so 39 boards of 12 ft stock with the boards running the 12 ft way, 10 joists at 16 in centers and about 700 screws. A large family deck of this size usually has a dining area and a seating area.

Run the 12 ft way, every 12 ft board is a full row with no end joints. Turn the boards to run the 16 ft way and a 12 ft board no longer spans the deck: buy 29 boards of 16 ft for that layout, or plan end joints. Stagger any joints across the deck so they never line up in neighboring rows, and always land a joint on a joist. Consider a picture-frame border, which hides the end joints, but it raises the waste figure, so use the 15% line in the waste table.

Want to change anything else? The calculator above is the full Deck Board Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many deck boards for a 12x16 deck?

It depends which way the boards run. Running the 12 ft way it is 39 boards of 12 ft (35 rows across the 16 ft side). Running the 16 ft way it is 29 boards of 16 ft (26 rows). Both use 5½ in boards with 1/8 in gaps and 10% waste.

How many joists does a 12x16 deck need?

At 16 in on center, 10 joists running the 16 ft width when the boards run the 12 ft way, or 13 joists of 12 ft when the boards run the 16 ft way. At 12 in it is 13, and at 24 in 7. Joist size and span must follow your local building code.

How many screws for a 12x16 deck?

About 700 screws with the boards running the 12 ft way, or 676 with them running the 16 ft way: two at every joist for each board. Buy a few extra, since they strip and get dropped.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.