How Many Deck Boards for a 16x16 Deck?

A 16 × 16 ft deck (256 ft²) needs about 52 deck boards of 12 ft (or 39 of 16 ft) running the 16 ft way, in 35 rows across the 16 ft side, with 10% waste and 5½ in boards at 1/8 in gaps. Each 16 ft row is longer than a 12 ft board, so the boards are joined end to end over a joist. The deck is square, so the count is the same whichever way the boards run. Underneath it needs 13 joists at 16 in spacing.

Jump to your result ↓

Your project

Usually the side along the house.

The direction joists run.

The real width of the board, not the name. A 5/4×6 or 2×6 deck board measures 5.5 in across.

The small space left between boards so water drains and wood can swell. Treated wood is laid nearly tight because it shrinks as it dries.

The length of the boards at the lumberyard. Longer boards mean fewer joints, but are harder to carry.

Distance from the middle of one joist to the middle of the next. 16 in is the usual choice; use 12 in for diagonal boards.

%

Covers cuts, bad boards and angled ends. Use 15% for diagonal decking.

Results

Example job shown. Change the numbers to match yours.

Deck boards to buy
52 boards
At your chosen board length, with waste
What to buy
  • JoistsEach as long as the deck width13 joists
  • Screws (2 per board at each joist)910 screws
Rows of decking across the width
35 rows
Total decking length (with waste)
616 linear ft
Deck area
256 ft²
  • Assumptions used: 10% waste added; 5.5 in boards with a 0.125 in gap; joists 16 in apart; 2 screws per board at each joist.
  • If your boards are shorter than the deck length, plan for butt joints to land on a joist (use a double joist there), and add boards for the extra cuts.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

16 ft16 ft9 of 13 shown

52 deck boards · 13 joists

Boards for a 16 × 16 ft deck, by board length

A 16 × 16 ft deck is a very large deck, often with a built-in bench or pergola. With 5½ in boards and 1/8 in gaps the deck has 35 rows, which is 560 ft of decking before waste. These counts include 10% waste:

Board lengthBoards to buyTotal length bought
8 ft boards77616 ft
10 ft boards62620 ft
12 ft boards52624 ft
16 ft boards39624 ft
20 ft boards39780 ft

The 16x16 deck material list adds the frame, footings and hardware.

Waste and layout

LayoutWaste12 ft boards16 ft boards
Straight, careful installer5%4937
Straight (typical)10%5239
Diagonal or picture-frame border15%5441

Joists and screws

Joists run the 16 ft width and are spaced along the 16 ft length.

Joist spacingJoistsScrews
12 in on center171,190
16 in on center13910
24 in on center9630

That is just the decking surface, for a 256 ft² deck. Posts, beams, footings, ledger, railings and stairs are extra, and a permit is usually required.

Finishing the surface

Treated lumber should be left to dry for a few weeks to a few months, then cleaned and sealed. At about 200 ft² per gallon, one coat of stain or sealer on this 256 ft² deck takes about 2 gallons, more for the railings and steps (use the deck stain calculator). Composite decking needs no stain, but still wants cleaning.

Decks higher than about 30 inches off the ground, or attached to a house, usually need a building permit, an inspection and a guardrail. Check before you order.

A 16 × 16 ft deck: a very large deck

A 16 × 16 ft deck is 256 sq ft, so 52 boards of 12 ft stock, 13 joists at 16 in centers and about 910 screws. Often it has a built-in bench or a pergola.

A built-in bench or planter adds load to a small area, so frame it as part of the deck. A pergola needs its own posts and footings. Plan the stairs, the railings and the lighting in advance, as it is much easier to run wires and fit fixtures while the frame is open. The cost of the boards is only part of the budget; the frame, footings and hardware cost as much.

Want to change anything else? The calculator above is the full Deck Board Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many deck boards for a 16x16 deck?

With 5½ in boards, 1/8 in gaps and 10% waste, you need 52 boards of 12 ft, or 39 boards of 16 ft. That is 35 rows of decking, and because the deck is square the count is the same in either direction.

How many joists does a 16x16 deck need?

At 16 in on center, 13 joists running the 16 ft width. At 12 in it is 17, and at 24 in 9. Joist size and span must follow your local building code.

How many screws for a 16x16 deck?

About 910 screws: two at every joist for each board. Buy a few extra, since they strip and get dropped.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.