How Many Deck Boards for a 16x20 Deck?

A 16 × 20 ft deck (320 ft²) needs about 64 deck boards of 12 ft running the 16 ft way, in 43 rows across the 20 ft side, with 10% waste and 5½ in boards at 1/8 in gaps. Each 16 ft row is longer than a 12 ft board, so the boards are joined end to end over a joist. Run the boards the 20 ft way instead and it is 39 boards of 20 ft in 35 rows. Underneath it needs 13 joists at 16 in spacing (16 with the boards turned).

Jump to your result ↓

Your project

Usually the side along the house.

The direction joists run.

The real width of the board, not the name. A 5/4×6 or 2×6 deck board measures 5.5 in across.

The small space left between boards so water drains and wood can swell. Treated wood is laid nearly tight because it shrinks as it dries.

The length of the boards at the lumberyard. Longer boards mean fewer joints, but are harder to carry.

Distance from the middle of one joist to the middle of the next. 16 in is the usual choice; use 12 in for diagonal boards.

%

Covers cuts, bad boards and angled ends. Use 15% for diagonal decking.

Results

Example job shown. Change the numbers to match yours.

Deck boards to buy
64 boards
At your chosen board length, with waste
What to buy
  • JoistsEach as long as the deck width13 joists
  • Screws (2 per board at each joist)1,118 screws
Rows of decking across the width
43 rows
Total decking length (with waste)
757 linear ft
Deck area
320 ft²
  • Assumptions used: 10% waste added; 5.5 in boards with a 0.125 in gap; joists 16 in apart; 2 screws per board at each joist.
  • If your boards are shorter than the deck length, plan for butt joints to land on a joist (use a double joist there), and add boards for the extra cuts.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

16 ft20 ft9 of 13 shown

64 deck boards · 13 joists

Boards for a 16 × 20 ft deck, by board length

A 16 × 20 ft deck is a big entertaining deck that probably needs a mid-span beam. With 5½ in boards and 1/8 in gaps, and the boards running the 16 ft way, the deck has 43 rows, which is 688 ft of decking before waste. These counts include 10% waste:

Board lengthBoards to buyTotal length bought
8 ft boards95760 ft
10 ft boards76760 ft
12 ft boards64768 ft
16 ft boards48768 ft
20 ft boards48960 ft

Which way do the boards run?

A 16 × 20 ft deck has two board counts, and both are right. Boards run across the joists, so the direction also sets how many joists there are and how long they are.

Boards runRowsBoards to buyJoists (16 in on center)Screws
The 16 ft way (this page)4364 of 12 ft13 of 20 ft1,118
The 20 ft way3539 of 20 ft16 of 16 ft1,120

To see the other layout in the calculator, swap the length and the width and pick 20 ft boards.

Waste and layout

LayoutWasteBoards run the 16 ft way, 12 ft boardsBoards run the 20 ft way, 20 ft boards
Straight, careful installer5%6137
Straight (typical)10%6439
Diagonal or picture-frame border15%6641

Joists and screws

Joists run the 20 ft width and are spaced along the 16 ft length.

Joist spacingJoistsScrews
12 in on center171,462
16 in on center131,118
24 in on center9774

That is just the decking surface, for a 320 ft² deck. Posts, beams, footings, ledger, railings and stairs are extra, and a permit is usually required.

Finishing the surface

Treated lumber should be left to dry for a few weeks to a few months, then cleaned and sealed. At about 200 ft² per gallon, one coat of stain or sealer on this 320 ft² deck takes about 2 gallons, more for the railings and steps (use the deck stain calculator). Composite decking needs no stain, but still wants cleaning.

Decks higher than about 30 inches off the ground, or attached to a house, usually need a building permit, an inspection and a guardrail. Check before you order.

A 16 × 20 ft deck: a big entertaining deck

A 16 × 20 ft deck is 320 sq ft, which takes 64 boards of 12 ft stock with the boards running the 16 ft way (39 boards of 20 ft if they run the 20 ft way), 13 joists at 16 in centers and about 1,118 screws. It is a big entertaining space, and with that span it needs a mid-span beam.

A deck of 320 sq ft is a significant structure, and it should be designed to the building code with proper footings, beams and connections. Many people hire a designer or a contractor for the frame and install the decking themselves. Order the boards in one batch from one lot, since color and moisture content vary, and let them acclimatize on site before fixing them.

Want to change anything else? The calculator above is the full Deck Board Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many deck boards for a 16x20 deck?

It depends which way the boards run. Running the 16 ft way it is 64 boards of 12 ft (43 rows across the 20 ft side). Running the 20 ft way it is 39 boards of 20 ft (35 rows). Both use 5½ in boards with 1/8 in gaps and 10% waste.

How many joists does a 16x20 deck need?

At 16 in on center, 13 joists running the 20 ft width when the boards run the 16 ft way, or 16 joists of 16 ft when the boards run the 20 ft way. At 12 in it is 17, and at 24 in 9. Joist size and span must follow your local building code.

How many screws for a 16x20 deck?

About 1,118 screws with the boards running the 16 ft way, or 1,120 with them running the 20 ft way: two at every joist for each board. Buy a few extra, since they strip and get dropped.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.