Concrete for a 12 inch tube, by height
A 12 in tube is used for the most common deck footing and column size. The "with waste" column adds 10%, and bag counts are for one tube.
| Height | One tube | With waste | 80 lb bags | 60 lb bags | 50 lb bags |
|---|---|---|---|---|---|
| 2 ft | 1.57 ft³ | 1.73 ft³ | 3 | 4 | 5 |
| 3 ft | 2.36 ft³ | 2.59 ft³ | 5 | 6 | 7 |
| 4 ft | 3.14 ft³ | 3.46 ft³ | 6 | 8 | 10 |
| 5 ft | 3.93 ft³ | 4.32 ft³ | 8 | 10 | 12 |
| 6 ft | 4.71 ft³ | 5.18 ft³ | 9 | 12 | 14 |
| 8 ft | 6.28 ft³ | 6.91 ft³ | 12 | 16 | 19 |
For several tubes (4 ft each)
A deck often needs 4 to 12 footings, so the numbers add up:
| Number of tubes | Concrete (with waste) | Cubic yards | 80 lb bags |
|---|---|---|---|
| 1 tube | 3.5 ft³ | 0.13 yd³ | 6 |
| 4 tubes | 13.8 ft³ | 0.51 yd³ | 24 |
| 6 tubes | 20.7 ft³ | 0.77 yd³ | 35 |
| 9 tubes | 31.1 ft³ | 1.15 yd³ | 52 |
| 12 tubes | 41.5 ft³ | 1.54 yd³ | 70 |
Past about 15 to 20 bags, it is worth pricing a small ready-mix delivery. See the concrete bags guide.
Weight and bearing area
A 12 inch tube filled 4 ft deep holds about 471 lb of concrete (150 lb per ft³), which matters if you are moving a precast footing or planning how to pour it. The base of the footing has an area of 0.79 ft², and that is what spreads the load into the soil.
| Soil (typical presumptive bearing value) | Pounds per ft² | Load one footing can bear |
|---|---|---|
| Clay or sandy clay | 1,500 | 1,178 lb |
| Sand, silty sand or clayey sand | 2,000 | 1,571 lb |
| Sandy gravel and gravel | 3,000 | 2,356 lb |
These are the presumptive values used in the International Residential Code for ordinary soils, shown only to illustrate the arithmetic. The footing size for a real deck or building must come from your plans and local code, because the soil, frost depth and loads decide it.
A 12 inch tube: the most common deck footing
A 12 inch tube holds 3.14 cubic feet of concrete per 4 ft of depth, so 6 bags of 80 lb for one hole with 10% waste. It is the standard size for deck footings and small porch columns.
A footing at this size usually needs a depth below the frost line and a bell or pad at the bottom if the soil is soft. Check the permit requirements, since many places inspect footings before the concrete is poured. For a deck with several footings, the quantity multiplies quickly, so use the table of tube counts and consider mixing in a wheelbarrow or ordering ready-mix if you have many.
Want to change anything else? The calculator above is the full Sonotube (Concrete Tube) Calculator: edit any number and the results update instantly.
Tools & materials for this project
Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.
Frequently asked questions
How much concrete in a 12 inch sonotube?
0.79 ft³ for every foot of height. A 4 ft tube holds 3.14 ft³, and with 10% waste you need 6 bags of 80 lb.
How many bags of concrete for a 12 inch tube, 4 feet deep?
6 bags of 80 lb, 8 bags of 60 lb or 10 bags of 50 lb, including 10% waste.
How deep should a 12 inch footing be?
Footings must usually reach below the frost line, and your building plans or local code set the depth and diameter, so use the numbers from your plans.
Related sizes and guides
Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.