How Much Concrete for a 14 Inch Sonotube?

A 14 inch concrete tube filled 4 ft deep holds 4.28 ft³ of concrete exact, before waste. Buy 8 bags of 80 lb mix, which adds 10% for spills and is the figure the calculator below shows. The table covers other heights and several tubes.

Jump to your result ↓

Your project

For a footing, the depth you will fill. For a column, its full height.

tubes
%

Spillage and a hole that is a little oversize.

Results

Example job shown. Change the numbers to match yours.

80 lb bags
8 bags
For the whole job, with waste
What to buy
  • 60 lb bags11 bags
  • 50 lb bags13 bags

Volume

One tube, no waste
4.28 ft³
All tubes, with waste
4.70 ft³
In cubic yards
0.17 yd³
  • Volume is that of a cylinder: π × radius² × height. The form tube diameter is its inside diameter. Footings usually must go below the frost line, and your plans or building department set their size and reinforcement.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

Ø 14 in4 ft

4.7 ft³ · 8 80 lb bags

Concrete for a 14 inch tube, by height

A 14 in tube is used for larger deck and porch piers. The "with waste" column adds 10%, and bag counts are for one tube.

HeightOne tubeWith waste80 lb bags60 lb bags50 lb bags
2 ft2.14 ft³2.35 ft³467
3 ft3.21 ft³3.53 ft³6810
4 ft4.28 ft³4.70 ft³81113
5 ft5.35 ft³5.88 ft³101416
6 ft6.41 ft³7.06 ft³121619
8 ft8.55 ft³9.41 ft³162126

For several tubes (4 ft each)

A deck often needs 4 to 12 footings, so the numbers add up:

Number of tubesConcrete (with waste)Cubic yards80 lb bags
1 tube4.7 ft³0.17 yd³8
4 tubes18.8 ft³0.70 yd³32
6 tubes28.2 ft³1.05 yd³48
9 tubes42.3 ft³1.57 yd³71
12 tubes56.4 ft³2.09 yd³95

Past about 15 to 20 bags, it is worth pricing a small ready-mix delivery. See the concrete bags guide.

Weight and bearing area

A 14 inch tube filled 4 ft deep holds about 641 lb of concrete (150 lb per ft³), which matters if you are moving a precast footing or planning how to pour it. The base of the footing has an area of 1.07 ft², and that is what spreads the load into the soil.

Soil (typical presumptive bearing value)Pounds per ft²Load one footing can bear
Clay or sandy clay1,5001,604 lb
Sand, silty sand or clayey sand2,0002,138 lb
Sandy gravel and gravel3,0003,207 lb

These are the presumptive values used in the International Residential Code for ordinary soils, shown only to illustrate the arithmetic. The footing size for a real deck or building must come from your plans and local code, because the soil, frost depth and loads decide it.

A 14 inch tube: larger deck and porch piers

A 14 inch tube holds 4.28 cubic feet of concrete per 4 ft of depth, which is 8 bags of 80 lb with 10% waste for one footing. It is used for larger deck and porch piers.

As the tube gets wider, the volume rises with the square of the diameter, so a few inches make a real difference to the number of bags. Moving that much concrete by hand is heavy work. Mix in a mixer or order a small ready-mix load, pour in lifts, and tamp or rod it to remove air pockets, then screed the top and set the hardware before it stiffens.

Want to change anything else? The calculator above is the full Sonotube (Concrete Tube) Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How much concrete in a 14 inch sonotube?

1.07 ft³ for every foot of height. A 4 ft tube holds 4.28 ft³, and with 10% waste you need 8 bags of 80 lb.

How many bags of concrete for a 14 inch tube, 4 feet deep?

8 bags of 80 lb, 11 bags of 60 lb or 13 bags of 50 lb, including 10% waste.

How deep should a 14 inch footing be?

Footings must usually reach below the frost line, and your building plans or local code set the depth and diameter, so use the numbers from your plans.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.