Concrete for an 18 inch tube, by height
An 18 in tube is used for large piers and footings for heavier structures. The "with waste" column adds 10%, and bag counts are for one tube.
| Height | One tube | With waste | 80 lb bags | 60 lb bags | 50 lb bags |
|---|---|---|---|---|---|
| 2 ft | 3.53 ft³ | 3.89 ft³ | 7 | 9 | 11 |
| 3 ft | 5.30 ft³ | 5.83 ft³ | 10 | 13 | 16 |
| 4 ft | 7.07 ft³ | 7.78 ft³ | 13 | 18 | 21 |
| 5 ft | 8.84 ft³ | 9.72 ft³ | 17 | 22 | 26 |
| 6 ft | 10.60 ft³ | 11.66 ft³ | 20 | 26 | 32 |
| 8 ft | 14.14 ft³ | 15.55 ft³ | 26 | 35 | 42 |
For several tubes (4 ft each)
A deck often needs 4 to 12 footings, so the numbers add up:
| Number of tubes | Concrete (with waste) | Cubic yards | 80 lb bags |
|---|---|---|---|
| 1 tube | 7.8 ft³ | 0.29 yd³ | 13 |
| 4 tubes | 31.1 ft³ | 1.15 yd³ | 52 |
| 6 tubes | 46.7 ft³ | 1.73 yd³ | 78 |
| 9 tubes | 70.0 ft³ | 2.59 yd³ | 117 |
| 12 tubes | 93.3 ft³ | 3.46 yd³ | 156 |
Past about 15 to 20 bags, it is worth pricing a small ready-mix delivery. See the concrete bags guide.
Weight and bearing area
An 18 inch tube filled 4 ft deep holds about 1,060 lb of concrete (150 lb per ft³), which matters if you are moving a precast footing or planning how to pour it. The base of the footing has an area of 1.77 ft², and that is what spreads the load into the soil.
| Soil (typical presumptive bearing value) | Pounds per ft² | Load one footing can bear |
|---|---|---|
| Clay or sandy clay | 1,500 | 2,651 lb |
| Sand, silty sand or clayey sand | 2,000 | 3,534 lb |
| Sandy gravel and gravel | 3,000 | 5,301 lb |
These are the presumptive values used in the International Residential Code for ordinary soils, shown only to illustrate the arithmetic. The footing size for a real deck or building must come from your plans and local code, because the soil, frost depth and loads decide it.
An 18 inch tube: large piers for heavier structures
An 18 inch tube takes 7.07 cubic feet of concrete per 4 ft of depth, 13 bags of 80 lb with 10% waste, for one footing. It is used for large piers and footings under heavier structures.
At this volume, hand-mixing bags is slow and the batches may set unevenly, so many builders order ready-mix or use a mixer. Each cubic foot of concrete weighs about 150 lb, so a single pour is heavy. The tube must be braced against the concrete pressure, backfilled around the outside, and held plumb until the concrete sets.
Want to change anything else? The calculator above is the full Sonotube (Concrete Tube) Calculator: edit any number and the results update instantly.
Tools & materials for this project
Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.
Frequently asked questions
How much concrete in an 18 inch sonotube?
1.77 ft³ for every foot of height. A 4 ft tube holds 7.07 ft³, and with 10% waste you need 13 bags of 80 lb.
How many bags of concrete for an 18 inch tube, 4 feet deep?
13 bags of 80 lb, 18 bags of 60 lb or 21 bags of 50 lb, including 10% waste.
How deep should an 18 inch footing be?
Footings must usually reach below the frost line, and your building plans or local code set the depth and diameter, so use the numbers from your plans.
Related sizes and guides
Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.