What Size Heater for a 24 × 24 ft Garage?

A 24 × 24 ft garage with insulated walls and ceiling needs about 13,190 BTU (3,866 W) to hold 50°F when it is 20°F outside, so a 4,000 W electric heater drawing 16.7 amps at 240 V. With no insulation it needs 27,346 BTU.

Jump to your result ↓

Your project

°F
°F

50°F stops things freezing and is comfortable in a coat. 60°F or more suits working for long periods.

$

Results

Example job shown. Change the numbers to match yours.

Heater size to buy
13,190 BTU per hour
Heat loss plus a 25% margin
In watts (electric)
3,866 W
Next standard electric size
4,000 W
Current at 240 VThe circuit breaker needs to be rated at 125% of this
16.7 A
Running cost, if it runs non-stop
0.66 dollars per hour
Heat the garage loses to hold the temperature
10,552 BTU per hour
Temperature rise
30 °F
  • This is the heat needed to hold the temperature in steady conditions. A large amount of concrete, tools and vehicles will take hours to warm, and opening the door loses a lot of heat. For a quick warm-up, choose the next size up. A fuel-burning heater needs a vent or a heater rated for garages, and a garage with a car or fuel in it has special safety rules: follow the heater's manual and your local code.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Heater size for a 24 × 24 ft garage, by insulation

An 8 ft ceiling, holding 50°F when it is 20°F outside, with a 25% margin. Amps are at 240 V for the standard electric size.

InsulationBTU per hourWattsElectric sizeAmps
None: bare studs, plain door27,346 BTU8,015 W10,000 W41.7 A
Walls and ceiling insulated13,190 BTU3,866 W4,000 W16.7 A
Well insulated, door too6,906 BTU2,024 W3,000 W12.5 A

How cold it gets where you live

The same garage with insulated walls and ceiling, held at 50°F, for different design temperatures outside:

Coldest outdoor temperatureHeat neededElectric size
0°F21,984 BTU7,500 W
10°F17,587 BTU7,500 W
20°F13,190 BTU4,000 W
30°F8,794 BTU3,000 W

How warm you want it

At 20°F outside, insulated. The last column is the cost per hour at 17¢ a kWh if the heater runs non-stop at the heat-loss rate:

Temperature insideHeat neededElectric sizeCost per hour
40°F8,794 BTU3,000 W$0.44
50°F13,190 BTU4,000 W$0.66
60°F17,587 BTU7,500 W$0.88
70°F21,984 BTU7,500 W$1.10

A 24 × 24 ft garage: a large two-car or a shop

A 24 × 24 ft garage has 576 sq ft of floor. Insulated, it needs about 13,190 BTU (3,866 W), a 4,000 W electric heater. To work at 60°F on a cold day it needs 7,500 W.

Heaters of 5,000 W and more are hard-wired on their own 240 V circuit. Check the panel has space and capacity before you buy one.

Enter your own garage in the garage heater size calculator, or read what size heater for a garage for breakers, fuel and safety.

Want to change anything else? The calculator above is the full Garage Heater Size Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

What size heater for a 24 × 24 ft garage?

About 13,190 BTU, or 3,866 W, to hold 50°F when it is 20°F outside, with insulated walls and ceiling and an 8 ft ceiling. That is a 4,000 W electric heater. With no insulation it needs 27,346 BTU.

How many amps does a heater for a 24 × 24 garage draw?

A 4,000 W heater draws 16.7 amps at 240 V. The breaker must be rated for 125% of that, and the wire sized to the breaker.

How much does it cost to heat a 24 × 24 ft garage?

About $0.66 an hour at 17¢ a kWh if the heater ran non-stop at the heat-loss rate. In practice the thermostat cycles it, and a garage you heat only while you work costs far less.

Will a 1,500 W space heater heat a 24 × 24 garage?

A 1,500 W heater gives 5,118 BTU an hour. That is not enough even when the garage is well insulated (6,906 BTU). It will take the chill off a small area near you.

Related sizes and guides

Related sizes

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.