Concrete needed for a 10 × 15 ft slab, by thickness
These figures are for the whole 150 ft² slab. The last column adds 10% for waste, which is what we suggest you order.
| Thickness | Cubic feet | Cubic yards | 80 lb bags | 60 lb bags | Yards with 10% waste |
|---|---|---|---|---|---|
| 4 in | 50.0 | 1.85 | 84 | 112 | 2.04 |
| 5 in | 62.5 | 2.31 | 105 | 139 | 2.55 |
| 6 in | 75.0 | 2.78 | 125 | 167 | 3.06 |
| 8 in | 100.0 | 3.70 | 167 | 223 | 4.07 |
What a 10 × 15 slab is used for
A 10 × 15 ft slab is a roomy patio with space for a dining set and seating, or a long walkway-and-landing combination. Four inches is standard for foot traffic. Add control joints every 8 to 10 feet to manage cracking.
Bags or ready-mix for 10 × 15 ft?
At 2.04 cubic yards, ready-mix is the sensible choice. Doing it with bags would mean 92 bags (about 3.7 tons of dry mix), which is too much to mix by hand before the first batch starts to set. Ask your supplier about their minimum order and how long you have to unload.
Don't forget what goes under and inside it
A slab needs a compacted base, usually 4 inches of gravel, which for this size is about 2.22 cubic yards after allowing for compaction (see the gravel calculator). Reinforcement such as rebar or wire mesh holds cracks tight: the rebar calculator counts bars for a 10 × 15 ft grid.
Base, reinforcement and joints
At 4 inches thick the finished 10 × 15 slab weighs about 3.8 tons. Under it goes a compacted gravel base: 4 inches is about 2.2 yd³ of stone including 20% for compaction (3.1 tons). A grid of #3 rebar at 16 inch centers takes about 13 bars of 20 ft (98 lb).
Concrete cracks as it shrinks, so cut or tool control joints about 8 to 12 ft apart (a common rule is two to three times the slab thickness in inches, read as feet) to decide where. For this slab that means about 0 joints along the 10 ft side and 1 joint along the 15 ft side, cut within 24 hours of the pour.
Falls on a 10 × 15 patio
At 1/4 in per foot, a patio that is 10 ft wide drops 2.50 in across its width, and 3.75 in if you slope it along its 15 ft length instead. Pick the direction that carries water away from the house and toward a lawn or drain, and set the forms to that slope before the pour.
With 150 sq ft of surface, 2.0 cu yd at 4 in and 92 bags if you mix it, the job is large enough that a broom finish is a good idea, as it gives wet feet some grip. Drag the broom across the slope, not down it, so the grooves do not channel water.
Want to change anything else? The calculator above is the full Concrete Calculator: edit any number and the results update instantly.
Tools & materials for this project
Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.
Frequently asked questions
How many bags of concrete for a 10x15 slab?
For a 4 inch slab you need 84 bags of 80 lb concrete (112 bags of 60 lb), or 92 bags of 80 lb with 10% waste. For a 6 inch slab it is 125 bags of 80 lb, or 138 with 10% waste.
How many cubic yards is a 10x15 slab?
A 10 × 15 ft slab is 1.85 yd³ at 4 inches, 2.31 yd³ at 5 inches and 2.78 yd³ at 6 inches, before waste. Add 5 to 10% when you order.
How much does a 10x15 concrete slab weigh?
At 4 inches thick it weighs roughly 7,500 lb (3.8 tons), at about 150 lb per cubic foot. At 6 inches it is about 11,250 lb.
Related sizes and guides
Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.