Concrete needed for a 5 × 5 ft slab, by thickness
These figures are for the whole 25 ft² slab. The last column adds 10% for waste, which is what we suggest you order.
| Thickness | Cubic feet | Cubic yards | 80 lb bags | 60 lb bags | Yards with 10% waste |
|---|---|---|---|---|---|
| 4 in | 8.3 | 0.31 | 14 | 19 | 0.34 |
| 5 in | 10.4 | 0.39 | 18 | 24 | 0.42 |
| 6 in | 12.5 | 0.46 | 21 | 28 | 0.51 |
| 8 in | 16.7 | 0.62 | 28 | 38 | 0.68 |
What a 5 × 5 slab is used for
A 5 × 5 ft slab suits an entry stoop or landing, a pad for rain barrels or trash cans, a small grill station, or the base for a compact storage box. Four inches is standard. Slope the surface slightly so water drains away.
Bags or ready-mix for 5 × 5 ft?
At 0.34 cubic yards, bagged concrete is the sensible choice. You will mix about 16 bags of 80 lb, which is manageable in a wheelbarrow or a small mixer, and no truck is needed.
Don't forget what goes under and inside it
A slab needs a compacted base, usually 4 inches of gravel, which for this size is about 0.37 cubic yards after allowing for compaction (see the gravel calculator). Reinforcement such as rebar or wire mesh holds cracks tight: the rebar calculator counts bars for a 5 × 5 ft grid.
Base, reinforcement and joints
At 4 inches thick the finished 5 × 5 slab weighs about 0.6 tons. Under it goes a compacted gravel base: 4 inches is about 0.4 yd³ of stone including 20% for compaction (0.5 tons). A grid of #3 rebar at 16 inch centers takes about 2 bars of 20 ft (15 lb).
Concrete cracks as it shrinks, so cut or tool control joints about 8 to 12 ft apart (a common rule is two to three times the slab thickness in inches, read as feet) to decide where. For this slab that means no joints, as it is small enough to pour as one panel.
A 5 × 5 landing at a door
A 25 sq ft landing at 4 in takes 16 bags of 80 lb mix (9.2 cu ft with waste). If it serves an exterior door, local codes commonly limit how far the landing may sit below the threshold, often about 1.5 in, so work out the finished height before you set the forms.
Pitch the surface away from the wall by about 1/4 in per foot, which is a fall of 1.25 in across its 5 ft depth. Check it with a level and a shim as you screed, because a landing that slopes toward the door sends rain under the threshold.
Want to change anything else? The calculator above is the full Concrete Calculator: edit any number and the results update instantly.
Tools & materials for this project
Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.
Frequently asked questions
How many bags of concrete for a 5x5 slab?
For a 4 inch slab you need 14 bags of 80 lb concrete (19 bags of 60 lb), or 16 bags of 80 lb with 10% waste. For a 6 inch slab it is 21 bags of 80 lb, or 23 with 10% waste.
How many cubic yards is a 5x5 slab?
A 5 × 5 ft slab is 0.31 yd³ at 4 inches, 0.39 yd³ at 5 inches and 0.46 yd³ at 6 inches, before waste. Add 5 to 10% when you order.
How much does a 5x5 concrete slab weigh?
At 4 inches thick it weighs roughly 1,250 lb (0.6 tons), at about 150 lb per cubic foot. At 6 inches it is about 1,875 lb.
Related sizes and guides
Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.