How Much Gravel for 1000 Square Feet?

1000 square feet of gravel at 3 inches deep needs 9.26 cubic yards, which is about 12.96 tons of crushed stone. The table covers other depths and pea gravel.

Jump to your result ↓

Your project

%

Add 10 to 15% for base layers that will be compacted, or if the ground is uneven.

$

Use your supplier's price. The default is an example.

Results

Example job shown. Change the numbers to match yours.

Gravel needed
12.96 tons
No waste allowance added
Cubic yards
9.26 yd³
Cubic feet
250.0 ft³
Weight
25,926 lb

Cost

Estimated cost$40.00 a ton (an example price, so use yours)
$518.52
  • Assumptions used: 0% waste and compaction allowance; 1.4 tons per yd³ for the material you chose.
  • Typical weights: about 1.4 tons per yd³ for crushed stone, 1.35 for pea gravel, 1.5 for road base. Ask your supplier for their exact figure, since moisture and size change it.

Blueprint

31.6 ft31.6 ft3 in

9.26 yd³

Gravel for 1000 square feet, by depth

No waste added. Add 10 to 15% for a compacted base. Weights are for crushed stone at 1.4 tons per cubic yard and pea gravel at 1.35.

DepthCubic yardsTons of crushed stoneTons of pea gravel
2 in6.178.648.33
3 in9.2612.9612.50
4 in12.3517.2816.67
6 in18.5225.9325.00

Which stone, and how much?

Use crushed stone for anything that must lock together and carry weight (bases, driveways, paths). Pea gravel and river rock are decorative and shift underfoot, so keep them to a shallow top layer. Put landscape fabric underneath to stop the stone sinking into the soil. See tons per cubic yard for the weights of other materials.

How many loads is that?

25,926 lb of gravel is 2 dump-truck loads (a tandem dump carries about 10 tons). A half-ton pickup can carry about a ton of dense material at most, and often less, so check your truck's payload rating (on the sticker in the door jamb) instead of guessing.

If you are moving it by hand, 250 ft³ is about 84 wheelbarrow loads (about 3 ft³ each).

One thousand square feet: a driveway-scale job

1,000 sq ft at 3 inches is 9.26 cubic yards (12.96 tons), and at 4 to 6 inches under a driveway it is several times that. A job like this is bought by the tractor-trailer or the dump-truck load, not the pickup.

For a surface this size, consider hiring a skid steer or a landscaper for the spreading, since doing it by wheelbarrow would take days. Plan the drainage: a driveway should slope slightly to shed water, and a gravel surface needs a crown or a cross-slope and an edge that holds the stone in.

Want to change anything else? The calculator above is the full Gravel Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How much gravel for 1000 square feet?

At 3 inches deep, 9.26 cubic yards, or 12.96 tons of crushed stone. At 4 inches it is 12.35 yd³ (17.28 tons), and at 2 inches 6.17 yd³.

How many tons of gravel for 1000 square feet at 4 inches?

17.28 tons of crushed stone (1.4 tons per yd³), or 16.67 tons of pea gravel. Add 10 to 15% if it will be compacted.

How deep should gravel be?

Two to three inches for decorative beds and paths over fabric, 4 to 6 inches (compacted) under patios and pavers, and 4 to 8 inches for driveways.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.