How Much Gravel for 2000 Square Feet?

2000 square feet of gravel at 3 inches deep needs 18.52 cubic yards, which is about 25.93 tons of crushed stone. The table covers other depths and pea gravel.

Jump to your result ↓

Your project

%

Add 10 to 15% for base layers that will be compacted, or if the ground is uneven.

$

Use your supplier's price. The default is an example.

Results

Example job shown. Change the numbers to match yours.

Gravel needed
25.93 tons
No waste allowance added
Cubic yards
18.52 yd³
Cubic feet
500.0 ft³
Weight
51,852 lb

Cost

Estimated cost$40.00 a ton (an example price, so use yours)
$1,037.04
  • Assumptions used: 0% waste and compaction allowance; 1.4 tons per yd³ for the material you chose.
  • Typical weights: about 1.4 tons per yd³ for crushed stone, 1.35 for pea gravel, 1.5 for road base. Ask your supplier for their exact figure, since moisture and size change it.

Blueprint

44.7 ft44.7 ft3 in

18.52 yd³

Gravel for 2000 square feet, by depth

No waste added. Add 10 to 15% for a compacted base. Weights are for crushed stone at 1.4 tons per cubic yard and pea gravel at 1.35.

DepthCubic yardsTons of crushed stoneTons of pea gravel
2 in12.3517.2816.67
3 in18.5225.9325.00
4 in24.6934.5733.33
6 in37.0451.8550.00

Which stone, and how much?

Use crushed stone for anything that must lock together and carry weight (bases, driveways, paths). Pea gravel and river rock are decorative and shift underfoot, so keep them to a shallow top layer. Put landscape fabric underneath to stop the stone sinking into the soil. See tons per cubic yard for the weights of other materials.

How many loads is that?

51,852 lb of gravel is 3 dump-truck loads (a tandem dump carries about 10 tons). A half-ton pickup can carry about a ton of dense material at most, and often less, so check your truck's payload rating (on the sticker in the door jamb) instead of guessing.

If you are moving it by hand, 500 ft³ is about 167 wheelbarrow loads (about 3 ft³ each).

Two thousand square feet: order by the truckload with a plan

2,000 sq ft at 3 inches deep is 18.52 cubic yards, 25.93 tons, and a thicker base can mean many times that. This is a lane, a parking area or a large yard, and the order is large enough that you should compare suppliers' prices per ton and per delivery.

Ask for a quote including delivery and spreading, and get the quantity checked by the supplier or a contractor on site. A project this size also deserves a drainage plan, an edge restraint, and compaction in layers. Order the full amount at once, since a second order of crushed stone from a different pit can differ in color and size.

Want to change anything else? The calculator above is the full Gravel Calculator: edit any number and the results update instantly.

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How much gravel for 2000 square feet?

At 3 inches deep, 18.52 cubic yards, or 25.93 tons of crushed stone. At 4 inches it is 24.69 yd³ (34.57 tons), and at 2 inches 12.35 yd³.

How many tons of gravel for 2000 square feet at 4 inches?

34.57 tons of crushed stone (1.4 tons per yd³), or 33.33 tons of pea gravel. Add 10 to 15% if it will be compacted.

How deep should gravel be?

Two to three inches for decorative beds and paths over fabric, 4 to 6 inches (compacted) under patios and pavers, and 4 to 8 inches for driveways.

Related sizes and guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.