Gravel for 50 square feet, by depth
No waste added. Add 10 to 15% for a compacted base. Weights are for crushed stone at 1.4 tons per cubic yard and pea gravel at 1.35.
| Depth | Cubic yards | Tons of crushed stone | Tons of pea gravel |
|---|---|---|---|
| 2 in | 0.31 | 0.43 | 0.42 |
| 3 in | 0.46 | 0.65 | 0.63 |
| 4 in | 0.62 | 0.86 | 0.83 |
| 6 in | 0.93 | 1.30 | 1.25 |
Which stone, and how much?
Use crushed stone for anything that must lock together and carry weight (bases, driveways, paths). Pea gravel and river rock are decorative and shift underfoot, so keep them to a shallow top layer. Put landscape fabric underneath to stop the stone sinking into the soil. See tons per cubic yard for the weights of other materials.
How many loads is that?
1,296 lb of gravel is one pickup trip. A half-ton pickup can carry about a ton of dense material at most, and often less, so check your truck's payload rating (on the sticker in the door jamb) instead of guessing.
If you are moving it by hand, 13 ft³ is about 5 wheelbarrow loads (about 3 ft³ each).
Fifty square feet: bags, not a delivery
50 sq ft at 3 inches deep is 0.46 cubic yards, 0.65 tons, which is a small quantity: most bagged gravel comes in half-cubic-foot or 0.5 ft³ bags, so you would buy a few dozen. A bulk supplier will often have a minimum delivery of a yard or two, so a patch this small may be cheaper from bags or a self-load.
A path, a pad under an air conditioner or a small bed fits this size. The preparation matters more than the amount of stone: dig out the grass, level and compact the soil, and put down landscape fabric, which stops the stone sinking in over time. Edging holds the stone in place.
Want to change anything else? The calculator above is the full Gravel Calculator: edit any number and the results update instantly.
Tools & materials for this project
Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.
Frequently asked questions
How much gravel for 50 square feet?
At 3 inches deep, 0.46 cubic yards, or 0.65 tons of crushed stone. At 4 inches it is 0.62 yd³ (0.86 tons), and at 2 inches 0.31 yd³.
How many tons of gravel for 50 square feet at 4 inches?
0.86 tons of crushed stone (1.4 tons per yd³), or 0.83 tons of pea gravel. Add 10 to 15% if it will be compacted.
How deep should gravel be?
Two to three inches for decorative beds and paths over fabric, 4 to 6 inches (compacted) under patios and pavers, and 4 to 8 inches for driveways.
Related sizes and guides
Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.