Roofing Calculator

Enter the footprint of your building, the overhang and the pitch of the roof. You get the actual roof area, the number of roofing squares, and the bundles of shingles to buy.

Jump to your result ↓

Your project

Pick the second choice if you already have the roof surface in square feet (from a measurement, a quote or an aerial report). The footprint and pitch are then not needed.

How steep the roof is: inches of rise for every 12 inches across. 6/12 is a typical gentle roof. If unsure, 6/12 is a safe guess; a steeper roof has more surface.

Extra shingles for cuts at the edges, ridge and valleys. A plain two-sided roof needs the least; more corners and valleys need more.

A "square" is 100 square feet of roof. Most shingles come 3 bundles to a square. Check the label on the bundle.

Results

Example job shown. Change the numbers to match yours.

Shingle bundles to buy
50 bundles
Includes your waste factor
What to buy
  • Synthetic underlayment (1,000 ft² rolls, 10% laps)2 rolls
  • Roofing nailsAbout 320 a square on the 16.5 squares to order, rounded up to the next 100: follow the nailing pattern on the shingle wrapper5,300 nails
Roof area, in squares
15.0 squares
Roof area
1,503 ft²
Squares to order (with waste)
16.5 squares
Slope multiplier
1.118 × footprint
  • One roofing square is 100 ft² of roof. Most shingles come three bundles to a square.
  • This assumes a gable or hip roof over the whole footprint. Dormers, valleys, chimneys and separate roof sections add to the total, so measure them separately.

Before you buy: round up to whole packs, check the size printed on the label, and add a little spare. Your supplier has the final say.

Blueprint

40 ft30 ft9 of 50 shown

15.0 squares of roof · 50 bundles

How this calculator works

The roof is bigger than the building's footprint because it slopes. We take the footprint including the overhang, then multiply by the slope factor, which is √(1 + (rise ÷ 12)²). A steeper roof means a larger factor. The area is divided by 100 to get roofing squares, increased by your waste factor, and multiplied by the bundles per square.

roof area = (length + 2 × overhang) × (width + 2 × overhang) × √(1 + (rise ÷ 12)²)

Worked example: a 40 × 30 ft house with 12 in overhangs has a footprint of 42 × 32 = 1,344 ft². At a 6/12 pitch the slope factor is 1.118, so the roof is 1,503 ft², or 15.0 squares. With 10% waste you order 16.5 squares, which is 50 bundles.

Assumptions and sources

The assumptions behind your numbers (waste, sizes, rates) are listed in the notes directly under your results, and they update when you change an input.

The formula and a worked example are shown above, so you can check any result by hand. Read how we calculate and check our numbers. Results are estimates for planning: supplier products vary, so check the size printed on the label.

Slope multiplier by roof pitch

Multiply the roof's footprint by this number to get the true roof area.

PitchSlope multiplierAngle
2/121.0149.5°
3/121.03114.0°
4/121.05418.4°
5/121.08322.6°
6/121.11826.6°
7/121.15830.3°
8/121.20233.7°
9/121.25036.9°
10/121.30239.8°
12/121.41445.0°

Bundles of shingles by roof area

For a roof surface you already know in square feet (not the footprint), at three bundles per square.

Roof areaSquaresBundles, no wasteBundles, 10% wasteBundles, 15% waste
500 ft²5151718
1,000 ft²10303335
1,500 ft²15455052
2,000 ft²20606669
2,500 ft²25758387
3,000 ft²309099104
4,000 ft²40120132138

Tips before you buy

  • Measure the pitch from the attic with a level and tape (rise over 12 in of run), or use a pitch gauge or phone app.
  • Ask your supplier whether the bundle count they quote includes starter strips and ridge caps. These are often bought separately.
  • Steep roofs (over about 8/12) need extra safety equipment and are harder and slower to work on. Many roofers charge more for them.
  • A tear-off of old shingles, new drip edge, flashing and underlayment all affect price. Treat this calculator as a materials estimate, not a quote.

Quick answers by size

Tools & materials for this project

Affiliate links As an Amazon Associate we earn from qualifying purchases. These links do not change what you pay.

Frequently asked questions

How many bundles of shingles are in a square?

Three bundles in most architectural and 3-tab shingles, and four in some premium types. One square covers 100 ft² of roof.

How do I calculate roof area from the house size?

Multiply the footprint (including overhang) by the slope factor for your pitch. For example, 1.118 at 6/12. Our calculator does this for you.

How much extra shingles should I order?

10% for a simple roof, 15% for hips and valleys, and up to 20% for complex roofs with many cuts.

How many bundles of shingles for 1000 square feet?

1,000 ft² of roof is 10 squares, which is 30 bundles at three to a square. Add 10% waste for a simple roof and you buy 33 bundles (35 with 15% waste). If 1,000 ft² is the footprint rather than the roof surface, enter the building size above so the slope is counted.

What is a roofing square?

A unit of 100 square feet of roof surface. Roofers quote and price in squares.

Add this calculator to your website

Running a blog, a contractor site or a class page? You can put this calculator on it for free. Copy the code below, and please leave the link underneath the calculator in place. The small script just resizes the frame to fit the results; if your site strips scripts, the calculator still works inside a scrolling frame.

Get the embed code

Related calculators & guides

Estimates only. Results assume standard materials and simple shapes. Supplier products vary, and the final call on quantity, structure and safety is yours. Check your local code and your supplier's guidance before ordering.